Joan Guillén i Pelegay

Hi @fachat, We need to know witch is your board, and witch are these leds (in your board, or maybe in a shield over your board). If the green LED...

Ok, So, led green is not the ON led. Green al red ard the RX and TX fins of the BT. Sorry, I have not a quick solution but I...

Hi @bpatricksullivan, Snap4Arduino developers are Linux users... so Linux is the most tested OS. I can't reproduce this issue... so we need more testing... - Launch Snap4Arduino from the console....

Hola! El problema con el crx es que el cambio de políticas en las versiones de Chrome/chromium daba problemas. Mira de seguir las instrucciones: -Descomprimir el archivo -Abrir la página...

Hola! Hemos podido conseguir un Chromebook para hacer pruebas y hemos podido comprobar que el plugin funciona correctamente. Comento detalles: - Como ya comentamos, ahora ya no deja subir la...

Hi @ToonTalk, First, a comment. We aware that we can not translate a dynamic and liveness language into an static sketch. In this way, we'll try to do our best...

Hi @ToonTalk, - Yes, #194 isn't caused by the 'i' name, and that issue will be fixed by #202 (avoiding global declaration). But fixing that and contemplating the global subject...

Hi @IlundainIlundain , On the board site, you don't need libraries, because Firmata supports I2C connection. So Snap4Arduino is able to play with this sensor. But, this is not direct!...

Hi Irwandi, Maybe the LCD example at the other issue (https://github.com/bromagosa/Snap4Arduino/issues/294#issuecomment-1281680434) helps you to test i2c devices (in general) Test that before and we can continue later here. Continue... Joan

Sorry! Yes, Snap4Arduino is maintained... but I have time this days... and also I have no MAC devices to test and reproduce it. But I asked tot test in Mac...