Easy-GPU-PV
Easy-GPU-PV copied to clipboard
jamesstringerparsec
Parsec not able to send Video
I've been using Hyper-V Manager to parsec for a while but Hyper-V is lock on 1024x768 resolution and display settings are greyed out. But parsec is working fine with it.
The only solution I find to make Hyper-V Manager work on 1080p is to turning on Enhanced session mode. But when I turned it on Parsec is not working anymore it says
"It looks like something went wrong. The host isn't sending any video data. Check the host's logs for more information"
How to fix this?
[D 2023-06-20 10:37:03] Parsec Virtual USB Adapter available [D 2023-06-20 10:37:03] Using Parsec Virtual USB Adapter for host gamepad input [D 2023-06-20 10:37:03] supdater_fetch: pservice.exe is up to date [D 2023-06-20 10:37:03] supdater_fetch: parsecd.exe is up to date [D 2023-06-20 10:37:08] STUN reply from ::ffff:35.169.37.243:3478 [D 2023-06-20 10:37:08] net = BUD|::ffff:192.168.0.178|56020 [I 2023-06-20 10:37:08] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:37:08] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:37:08] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:37:08] * mfx_shared_init/MFXInit[56] = -3 [D 2023-06-20 10:37:08] MTY_SOLoad: 'LoadLibrary' failed to find 'Wintab32.dll' with error 0x7E [D 2023-06-20 10:37:08] Wacom: Wintab context failed to initialize [D 2023-06-20 10:43:45] net = BUD|::ffff:172.31.35.40|22894 [I 2023-06-20 10:43:45] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:43:45] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:43:45] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:43:45] * mfx_shared_init/MFXInit[56] = -3 [D 2023-06-20 10:44:25] STUN reply from ::ffff:52.86.26.213:3478 [D 2023-06-20 10:44:25] net = BUD|::ffff:192.168.0.178|56056 [D 2023-06-20 10:44:26] Virtual Display Driver State: OK [D 2023-06-20 10:44:26] display_x = 1920 [D 2023-06-20 10:44:26] display_y = 1080 [D 2023-06-20 10:44:26] display_hz = 60 [D 2023-06-20 10:44:26] Initializing with normal audio capture [D 2023-06-20 10:44:26] dxgi = 1.5 [D 2023-06-20 10:44:26] format = BGRA [I 2023-06-20 10:44:26] freehitss#12902430 connected. [D 2023-06-20 10:44:26] encoder = nvidia [D 2023-06-20 10:44:26] input = rgba [D 2023-06-20 10:44:26] codec = h264 [D 2023-06-20 10:44:26] encode_x = 1920 [D 2023-06-20 10:44:26] encode_y = 1080 [D 2023-06-20 10:44:33] [0] FPS:15.8/1, L:2.5/71.5, B:0.3/2.6, N:0/0/0 [D 2023-06-20 10:44:35] [0] FPS:49.9/0, L:2.3/6.7, B:2.2/4.9, N:0/0/0 [D 2023-06-20 10:44:37] [0] FPS:48.7/0, L:3.4/6.5, B:1.3/7.9, N:0/0/0 [D 2023-06-20 10:44:39] [0] FPS:40.3/0, L:5.0/8.6, B:0.9/10.1, N:0/0/0 [D 2023-06-20 10:44:45] display_x = 1920 [D 2023-06-20 10:44:45] display_y = 1080 [D 2023-06-20 10:44:45] display_hz = 144 [I 2023-06-20 10:44:45] freehitss#12902430 disconnected. [I 2023-06-20 10:45:02] * mfx_shared_init/MFXInit[56] = -3 [D 2023-06-20 10:48:11] net = BUD|::ffff:172.31.35.40|22894 [I 2023-06-20 10:48:11] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:48:11] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:48:11] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:48:11] * mfx_shared_init/MFXInit[56] = -3 [I 2023-06-20 10:50:43] * mfx_shared_init/MFXInit[56] = -3
To fix you must enable the Hyper-V video adapter, change resolution then disable the adapter (in the VM)
Then parsec will run at the desired res
In your VM open Parsec config txt and change private mode to false - had the same issue, helped
To fix you must enable the Hyper-V video adapter, change resolution then disable the adapter (in the VM)
Then parsec will run at the desired res
How to do so? My hyperv VM stuck at a very low res and every time the audio and mouse (I think because I hears the sound) work, but no video output is sent by parsec, where do you enable Hyper-V video adapter and tweak settings?
To fix you must enable the Hyper-V video adapter, change resolution then disable the adapter (in the VM) Then parsec will run at the desired res
How to do so? My hyperv VM stuck at a very low res and every time the audio and mouse (I think because I hears the sound) work, but no video output is sent by parsec, where do you enable Hyper-V video adapter and tweak settings?
Open the Hyper-V console to do this.