Jakob Krantz

> If the controller did not generate the LE Periodic Advertising Sync Established event then the LE Periodic Advertising Sync Lost event from the controller should give an error message...

@cvinayak good catch, missed that in the sample but unfortunately no difference. In the "real" application I had the call to `bt_le_per_adv_sync_delete` however had it after and not before `bt_le_scan_stop`,...

@sdetweil You can find info about how nvs works here https://docs.zephyrproject.org/latest/services/storage/nvs/nvs.html#flash-wear For detailed info regarding NRF52833 (NINA-B406) you can this info in https://infocenter.nordicsemi.com/pdf/nRF52833_PS_v1.3.pdf (it's min 10 000). For the none...

@sdetweil if two anchors was reading the same tag good, and one anchor reading it bad, then there is no problem in the tag. It should work pretty well about...

I have the same issue: ``` Home Assistant Core 2022.6.7 Home Assistant Supervisor 2022.07.0 Home Assistant OS 8.2 Path to configuration.yaml: /config Frontend version: 20220601.0 - latest ```

Ah yeah that one, I didn't think of that when designing it. What I ended up doing was to unscrew the "backplate" on the servo so that the wires wouldn't...

Awesome! I also shortened the PVC pipes quite a bit in the arm because the servos had some problems when they where as long as in the design. But since...

Sure, both are 8 cm. I use the MG946R in the arm as they have 13kg/cm torque compared to MG996R with 11kg/cm, but have the exact same dimentions. I have...

Awesome! Looks cool! Now just some cable management, good luck :smiley:

Hi, there is no guide, but it not hard to wire it up to a standard RC receiver. That is how I initially ran it (without the the arm). For...