when I upgrade to Operating System 9.0 sata disk on ODROID-XU4 not detect

[MihaT2021]

trafficstars

Describe the issue you are experiencing

before Operating System 9.0 I was able to use ssd disk. After I update o.s. to 9.0 it did not boot . I was able to install on SD card again (o.s. 9.0 ) but disk is not veasible.

from terminal: [core-ssh ~]$ df Filesystem 1K-blocks Used Available Use% Mounted on overlay 29741340 11146824 17346944 39% / /dev/mmcblk0p4 29741340 11146824 17346944 39% /media /dev/mmcblk0p4 29741340 11146824 17346944 39% /config devtmpfs 964396 0 964396 0% /dev tmpfs 1014060 0 1014060 0% /dev/shm /dev/mmcblk0p4 29741340 11146824 17346944 39% /data /dev/mmcblk0p4 29741340 11146824 17346944 39% /addons /dev/mmcblk0p4 29741340 11146824 17346944 39% /backup /dev/mmcblk0p4 29741340 11146824 17346944 39% /ssl /dev/mmcblk0p4 29741340 11146824 17346944 39% /share /dev/mmcblk0p4 29741340 11146824 17346944 39% /run/audio tmpfs 405624 3608 402016 1% /run/dbus /dev/mmcblk0p4 29741340 11146824 17346944 39% /etc/asound.conf /dev/mmcblk0p4 29741340 11146824 17346944 39% /etc/hosts /dev/mmcblk0p4 29741340 11146824 17346944 39% /etc/resolv.conf /dev/mmcblk0p4 29741340 11146824 17346944 39% /etc/hostname tmpfs 1014060 0 1014060 0% /dev/shm /dev/mmcblk0p4 29741340 11146824 17346944 39% /etc/pulse/client.conf tmpfs 1014060 0 1014060 0% /proc/asound devtmpfs 964396 0 964396 0% /proc/keys devtmpfs 964396 0 964396 0% /proc/timer_list tmpfs 1014060 0 1014060 0% /proc/scsi tmpfs 1014060 0 1014060 0% /sys/firmware

[core-ssh ~]$ lshw core-ssh description: ARMv7 Processor rev 3 (v7l) width: 256 bits capabilities: smp *-core description: Motherboard physical id: 0 *-memory description: System memory physical id: 0 size: 1980MiB *-cpu:0 physical id: 1 bus info: cpu@0 size: 800MHz capacity: 1400MHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-cpu:1 physical id: 2 bus info: cpu@1 size: 800MHz capacity: 1400MHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-cpu:2 physical id: 3 bus info: cpu@2 size: 800MHz capacity: 1400MHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-cpu:3 physical id: 4 bus info: cpu@3 size: 800MHz capacity: 1400MHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-cpu:4 physical id: 5 bus info: cpu@4 size: 2GHz capacity: 2GHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-cpu:5 physical id: 6 bus info: cpu@5 size: 2GHz capacity: 2GHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-cpu:6 physical id: 7 bus info: cpu@6 size: 2GHz capacity: 2GHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-cpu:7 physical id: 8 bus info: cpu@7 size: 2GHz capacity: 2GHz capabilities: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm cpufreq *-mmc0 description: MMC Host physical id: 1 logical name: mmc0 *-device description: SD Card product: USD00 vendor: Unknown (173) physical id: b368 logical name: /dev/mmcblk0 version: 1.0 date: 06/2021 serial: 306317747 capabilities: sd *-mmc1 description: MMC Host physical id: 2 logical name: mmc1

Disk is ok I put it to windows and it is weasible..

If I install on anather SD card o.s ver 8.5 ssd is visible.

on o.s. version 8.5: /dev/sda

please help.

What operating system image do you use?

odroid-xu4 (Hardkernel ODROID-XU4)

What version of Home Assistant Operating System is installed?

9.0

Did you upgrade the Operating System.

Yes

Steps to reproduce the issue

1.ugrade to os. 9.0 2. 3. ...

Anything in the Supervisor logs that might be useful for us?

.

Anything in the Host logs that might be useful for us?

.

System Health information

.

Additional information

No response

[agners]

You are connecting the SATA SSD through USB 3.0 correct? Is the USB port working otherwise (e.g. USB Zigbee dongle or another device?). When downgrading to 8.5, does that make the USB SATA SSD work again?

[MihaT2021]

I use ODROID-HC1 https://www.hardkernel.com/shop/odroid-hc1-home-cloud-one/

As you see this odroid have sata connector onbord. I do not use USB disk.

The basic difference:

1.) When I download image and install on SDcard : https://github.com/home-assistant/operating-system/releases/download/9.0/haos_odroid-xu4-9.0.img.xz.

Disk SSD SATA is not recognize on home assistent

2.) When I download image 8.5 and install on SDcard. https://github.com/home-assistant/operating-system/releases/download/8.5/haos_odroid-xu4-8.5.img.xz

Disk SSD SATA is recognize on home assistent.

[agners]

Unfortunately, I don't have such a device here, so I can test :(

We only changed minor kernel versions, so it is a bit surprising to me that this stopped working.

Can you run dmesg on both OS versions and share? That might give a hint what is going on.

[MihaT2021]

Hire are files with dmsg results:

dmsg_os_90.log dmsg_os_85.log

[MihaT2021]

9.0 again: dmsg_os_90-v2.log

[MihaT2021]

Today I update to 9.2 .. Sata disk is not recognize. os_9.2.log

[MihaT2021]

Hi,

@agners did you find in my files something usefull?

regards

[agners]

It seems that HC1 is using an on-board USB to S-ATA adapter, this is from the HAOS 8.5 log (Linux 5.15.60).

[    5.428970] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    5.436950] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
[    5.463189] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 1.05
[    5.470041] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.477068] usb 4-1: Product: USB to SATA bridge
[    5.481695] usb 4-1: Manufacturer: JMicron
[    5.485708] usb 4-1: SerialNumber: DB00000000013B

In HAOS 9.0 (with Linux 5.15.67) this is missing.

As the first line is already missing, it seems the whole controller does not get initialized :confused:

There was one change, and that was resetting the Ethernet properly (see https://github.com/home-assistant/operating-system/pull/2108). But from what I can tell, Ethernet is totally unrelated with the S-ATA part of that board, so I doubt that this is the culprit.

I'll create a build with that patch reverted, let's see if that helps fix the problem.

Can you also give the latest nightly a try? https://os-builds.home-assistant.io/10.0.dev20221013/

[MihaT2021]

Ok i try it

Home Assistant 2022.10.4 Supervisor 2022.10.0 Operating System 10.0.dev20221013 Frontend 20221010.0 - latest

Disk is not recognize.

[MihaT2021]

I can't install ssh terminal. Home Assistant 2022.10.4 Supervisor 2022.10.0 Operating System 10.0.dev20221013 Frontend 20221010.0 - latest

[agners]

Thanks for testing!

I can't install ssh terminal.

Hm, that is probably unrelated, but I am not sure.

Can you try this image: https://os-builds.home-assistant.io/haos_odroid-xu4-10.0.dev20221017.img.xz (this is current dev but with c1e2d655bc912f9b260fb4ab4560152b1d0975e3 reverted)

[MihaT2021]

[MihaT2021]

Home Assistant 2022.10.4 Supervisor 2022.10.0 Operating System 10.0.dev20221017 Frontend 20221010.0 - latest

Same, disk is not found and also addon ssh terminal have same issue installing.

supervisor.log

[agners]

Ok, that confirms that the only HAOS change is not the culprit. It must be a stable kernel regression then.

I've uploaded another image, can you give this a try again? https://os-builds.home-assistant.io/haos_odroid-xu4-10.0.dev20221017-2.img.xz

[MihaT2021]

last image it's WORKING! :-) disk is recognize.and also addon ssh terminal is working.

Home Assistant 2022.10.4 Supervisor 2022.10.0 Operating System 10.0.dev20221017 Frontend 20221010.0 - latest

v-2.log

[agners]

Ok, that proves it is a Linux kernel regression between v5.15.61 and v5.15.67. Unfortunately, I had to delete all the development builds from back then :cry:

Going back in kernel version is not an option. We need to find the exact change. I have found two commit which might explain the problem:

55d328924347 usb: dwc3: disable USB core PHY management
9d6a2d022010 usb: dwc3: fix PHY disable sequence

This image uses v5.15.67 with the two suspected commits reverted: https://os-builds.home-assistant.io/haos_odroid-xu4-10.0.dev20221017-3.img.xz

[MihaT2021]

haos_odroid-xu4-10.0.dev20221017-3.img.xz

disk is recognize.SATA disk is working. And addon ssh terminal is NOT working.

[agners]

And one more, this isolates it to a single commit, I assume the culprit is this change

55d328924347 usb: dwc3: disable USB core PHY management

Can you give this a try? https://os-builds.home-assistant.io/haos_odroid-xu4-10.0.dev20221018.img.xz

And addon ssh terminal is NOT working.

I assume that the add-on thing is unrelated to the kernel change, probably some random factor which makes it work sometimes.

Can you try ha su reload next time it doesn't work, and see if that helps?

[MihaT2021]

yes version: Home Assistant 2022.10.4 Supervisor 2022.10.0 Operating System 10.0.dev20221018 Frontend 20221010.0 - latest is working :)

SATA disk is working.

[agners]

@MihaT2021 ok, thanks for testing. I'll report it to the upstream developers. For HAOS we can revert the offending commit for now, so this should be fixed in the next release.

[MihaT2021]

Thx

V tor., 18. okt. 2022 17:29 je oseba Stefan Agner @.***> napisala:

@MihaT2021 https://github.com/MihaT2021 ok, thanks for testing. I'll report it to the upstream developers. For HAOS we can revert the offending commit for now, so this should be fixed in the next release.

— Reply to this email directly, view it on GitHub https://github.com/home-assistant/operating-system/issues/2153#issuecomment-1282582780, or unsubscribe https://github.com/notifications/unsubscribe-auth/AWX62MQB35MLCKEKC7D3DRDWD267FANCNFSM6AAAAAAQUCRUNA . You are receiving this because you were mentioned.Message ID: @.***>

[agners]

@MihaT2021 sorry to bother you again, the upstream patch developer has a possible "proper" fix for this problem, but he is not sure. Could you test this image?

https://os-builds.home-assistant.io/haos_odroid-xu4-10.0.dev20221020.img.xz

[MihaT2021]

Yes, it is working. Sata disk is recognize.

Home Assistant 2022.10.5 Supervisor 2022.10.0 Operating System 10.0.dev20221020 Frontend 20221010.0 - latest

[agners]

Hm, I am sorry, I made an error with the above build, that was too late yesterday :cold_sweat: . Can you retry with this version: https://os-builds.home-assistant.io/haos_odroid-xu4-10.0.dev20221021.img.xz

[MihaT2021]

Home Assistant 2022.10.5 Supervisor 2022.10.0 Operating System 10.0.dev20221021 Frontend 20221010.0 - latest

SATA disk is not recognize.

[MihaT2021]

Home Assistant 2022.10.5 Supervisor 2022.10.0 Operating System 9.3 Frontend 20221010.0 - latest https://github.com/home-assistant/operating-system/releases/download/9.3/haos_odroid-xu4-9.3.img.xz

SATA Disk is working. :)

[agners]

Closing as this is resolved by https://github.com/home-assistant/operating-system/pull/2194.

The problematic patch has also been lined up to the stable kernel updates (Revert "usb: dwc3: disable USB core PHY management").