sv06 icon indicating copy to clipboard operation
sv06 copied to clipboard

Published 20 hours ago • verified publisher icon hillsoftware

Printer gets stuck

Open quantumfrost opened this issue 2 years ago • 4 comments
trafficstars

Since I flashed this firmware, the printer randomly gets stuck during the print, and the extruder motor keeps vibrating. The behavior is exactly the same as the video in #10. Even though the OP there says it was a piece of plastic, I doubt that they actually fixed it, because I have checked and I don't have any obstructions. When it happens, I can turn the extruder by hand and confirm that there is no blockage. I've tried with Octoprint and SD.

quantumfrost avatar Mar 27 '23 06:03 quantumfrost

Please try disabling linear advance and see if that fixes it. It may be a bug Marlin introduced in a previous pull request

hillsoftware avatar Mar 27 '23 17:03 hillsoftware

Hasn't occurred yet after disabling LA. May be related to this, though the behavior they describe isn't exactly the same.

quantumfrost avatar Mar 27 '23 22:03 quantumfrost

Totaly the same problem, and I thought is it is from loose gear or something. Happens on every print taller than 4mm. I was fighting this for some days now util ppl frow a Sovol FB group said it is a known issue... https://youtu.be/CVDmhh3ry3o

kdobrev avatar Mar 28 '23 15:03 kdobrev

Hasn't occurred yet after disabling LA. May be related to this, though the behavior they describe isn't exactly the same.

Looks like they've fixed the linked issue. Not sure if that fixes our issue, but worth a try.

quantumfrost avatar Apr 06 '23 23:04 quantumfrost