Deep-Live-Cam
Deep-Live-Cam copied to clipboard
hacksider
Preview blackscreen
If I try to use the webcam in live mode, the LED from my webcam turns on, but the preview screen is just black.
Most likely your input image is not suitable (i.e. too small or too big, or not clear enough)
Same here, just black preview. No errors in cmd! What are the recommended resolutions? Anyone know?
I was experiencing the same issue with Deep Live Cam, where the preview screen stayed black even though the LED on my webcam was on. In my case, I found out that there was another camera set as the default on my system, which was causing the problem.
Here’s what I did to fix it:
Checked the installed cameras: I went to the Device Manager and located the extra camera that was set as the default. Uninstalled the extra camera: In the Device Manager, I right-clicked on the extra camera (in my case, "IdeaCamera") and selected "Uninstall device." Set the correct webcam as default: I made sure that my main webcam was functioning correctly after removing the extra camera.
After doing this, Deep Live Cam started working correctly. However, I'm now facing a new problem: there's a black square over my face, and the face swap isn’t working properly. Has anyone encountered this issue and knows how to fix it?
Make sure that your camera is the default camera. If you have a virtual camera, it might be the one set to default.
No error during the installation process but my output brings out a black square over my video, how do I rectify
Yes the version of onnx runtime is correct, but the black square still covers my output
On Sat, Feb 1, 2025 at 7:33 AM Kenneth Estanislao @.***> wrote:
Try checking the version of onnx runtime you're using if it is correct.
— Reply to this email directly, view it on GitHub https://github.com/hacksider/Deep-Live-Cam/issues/339#issuecomment-2628809163, or unsubscribe https://github.com/notifications/unsubscribe-auth/BOWMIPDRMU7ABXPAJE5GYP32NRTENAVCNFSM6AAAAABMSNBKBCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMRYHAYDSMJWGM . You are receiving this because you commented.Message ID: @.***>
Please how do I rectify it, that’s the only problem I’m having right now
On Sat, Feb 1, 2025 at 5:28 PM Multi Coin Investment < @.***> wrote:
Yes the version of onnx runtime is correct, but the black square still covers my output
On Sat, Feb 1, 2025 at 7:33 AM Kenneth Estanislao < @.***> wrote:
Try checking the version of onnx runtime you're using if it is correct.
— Reply to this email directly, view it on GitHub https://github.com/hacksider/Deep-Live-Cam/issues/339#issuecomment-2628809163, or unsubscribe https://github.com/notifications/unsubscribe-auth/BOWMIPDRMU7ABXPAJE5GYP32NRTENAVCNFSM6AAAAABMSNBKBCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMRYHAYDSMJWGM . You are receiving this because you commented.Message ID: @.***>
I have my camera, and it enabled. When i use it through any other app, it works. I have it selected in the app, and when i click "Live" only a gray screen appears.
Am a new user of Deeplivecam and My deep live cam have been hanging Since I downloaded it and because of it I never use it. How do I resolve it pls
