raspberry-pi-pcie-devices
raspberry-pi-pcie-devices copied to clipboard
Published
20 hours ago •
geerlingguy
geerlingguy
Add Pi 5 HAT: Geekworm X1007
trafficstars
The Geekworm X1007 could be interesting for a simple two 2,5" drive NAS using the standard PSU (27W).
The Redxa Penta SATA HAT supports up to 5 drives, but requires a 12V PSU. Currently I don't see any other SATA HATs in the list.
Hi Jeff, @geerlingguy
I got the board and used it with two Samsung SSD 870 EVO 1TB.
I setup OpenMediaValult and used the md plugin to setup a raid 1 / mirror. I could transfer a 3GB iso file with about 100MB/s via SMB.
I read in the contributors file, that you would like to see the dmesg and lspci outputs. I have no idea , which part of the dmesg is relevant, so I posted the the full and long log.
Do you want any more details? If not I would create a PR to add it to the database.
Best regards, Moritz
pi@pi5nas:~ $ sudo lspci
0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21)
0000:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller
0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21)
0001:01:00.0 Ethernet controller: Device 1de4:0001
pi@pi5nas:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.6.20+rpt-rpi-v8 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07)
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001c00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000001c00000..0x0000000015bfffff (327680 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[ 0.000000] OF: reserved mem: 0x000000003fd165c0..0x000000003fd165f6 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 30 pages/cpu s85672 r8192 d29016 u122880
[ 0.000000] pcpu-alloc: s85672 r8192 d29016 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:E2:CA:F6 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=ad064e55-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063360
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[ 0.000000] Memory: 7789876K/8384512K available (13376K kernel code, 2210K rwdata, 4260K rodata, 4864K init, 1083K bss, 266956K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43116 entries in 169 pages
[ 0.000000] ftrace: allocated 169 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000156] Console: colour dummy device 80x25
[ 0.000161] printk: console [tty1] enabled
[ 0.000331] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000340] pid_max: default: 32768 minimum: 301
[ 0.000364] LSM: initializing lsm=capability,integrity
[ 0.000433] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000459] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000792] cgroup: Disabling memory control group subsystem
[ 0.001252] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.001285] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.001323] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.001397] rcu: Hierarchical SRCU implementation.
[ 0.001401] rcu: Max phase no-delay instances is 1000.
[ 0.002013] EFI services will not be available.
[ 0.002118] smp: Bringing up secondary CPUs ...
[ 0.002306] Detected PIPT I-cache on CPU1
[ 0.002352] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.002562] Detected PIPT I-cache on CPU2
[ 0.002598] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.002806] Detected PIPT I-cache on CPU3
[ 0.002837] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.002866] smp: Brought up 1 node, 4 CPUs
[ 0.002885] SMP: Total of 4 processors activated.
[ 0.002890] CPU features: detected: 32-bit EL0 Support
[ 0.002893] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.002898] CPU features: detected: Common not Private translations
[ 0.002902] CPU features: detected: CRC32 instructions
[ 0.002906] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.002910] CPU features: detected: LSE atomic instructions
[ 0.002914] CPU features: detected: Privileged Access Never
[ 0.002918] CPU features: detected: RAS Extension Support
[ 0.002923] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.002960] CPU: All CPU(s) started at EL2
[ 0.002964] alternatives: applying system-wide alternatives
[ 0.004913] devtmpfs: initialized
[ 0.007892] Enabled cp15_barrier support
[ 0.007902] Enabled setend support
[ 0.007950] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.007960] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.011491] pinctrl core: initialized pinctrl subsystem
[ 0.011642] DMI not present or invalid.
[ 0.011813] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.012312] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.012394] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.012485] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.012507] audit: initializing netlink subsys (disabled)
[ 0.012562] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1
[ 0.012685] thermal_sys: Registered thermal governor 'step_wise'
[ 0.012697] cpuidle: using governor menu
[ 0.012761] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.012791] ASID allocator initialised with 32768 entries
[ 0.013095] Serial: AMBA PL011 UART driver
[ 0.014028] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.014393] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[ 0.014408] printk: console [ttyAMA10] enabled
[ 0.758408] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd
[ 0.772463] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000
[ 0.788367] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.795448] Modules: 0 pages in range for non-PLT usage
[ 0.795450] Modules: 517792 pages in range for PLT usage
[ 0.805096] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.818104] iommu: Default domain type: Translated
[ 0.822925] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.829216] SCSI subsystem initialized
[ 0.833011] usbcore: registered new interface driver usbfs
[ 0.838530] usbcore: registered new interface driver hub
[ 0.843870] usbcore: registered new device driver usb
[ 0.849026] pps_core: LinuxPPS API ver. 1 registered
[ 0.854008] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.863182] PTP clock support registered
[ 0.867380] vgaarb: loaded
[ 0.870192] clocksource: Switched to clocksource arch_sys_counter
[ 1.091381] VFS: Disk quotas dquot_6.6.0
[ 1.095335] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.102266] FS-Cache: Loaded
[ 1.105186] CacheFiles: Loaded
[ 1.109871] NET: Registered PF_INET protocol family
[ 1.114922] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.124913] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 1.133521] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.141304] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.149532] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 1.158621] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.165327] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 1.172969] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.179907] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.187312] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.193110] RPC: Registered named UNIX socket transport module.
[ 1.199062] RPC: Registered udp transport module.
[ 1.203782] RPC: Registered tcp transport module.
[ 1.208501] RPC: Registered tcp-with-tls transport module.
[ 1.214006] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.220479] PCI: CLS 0 bytes, default 64
[ 1.224570] kvm [1]: IPA Size Limit: 40 bits
[ 1.224589] Trying to unpack rootfs image as initramfs...
[ 1.234303] kvm [1]: vgic interrupt IRQ9
[ 1.238279] kvm [1]: VHE mode initialized successfully
[ 1.243948] Initialise system trusted keyrings
[ 1.248488] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.254977] zbud: loaded
[ 1.257737] NFS: Registering the id_resolver key type
[ 1.262837] Key type id_resolver registered
[ 1.267039] Key type id_legacy registered
[ 1.271068] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.277798] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.285422] Key type asymmetric registered
[ 1.289543] Asymmetric key parser 'x509' registered
[ 1.294472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.301961] io scheduler mq-deadline registered
[ 1.306514] io scheduler kyber registered
[ 1.310553] io scheduler bfq registered
[ 1.318502] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 27)
[ 1.327722] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 28)
[ 1.335477] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 29)
[ 1.343234] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 30)
[ 1.350983] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 31)
[ 1.360127] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 32)
[ 1.401768] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.408655] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 34, base_baud = 6000000) is a Broadcom BCM7271 UART
[ 1.419302] serial serial0: tty port ttyS0 registered
[ 1.424819] iproc-rng200 107d208000.rng: hwrng registered
[ 1.430578] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 1.438250] Freeing initrd memory: 13448K
[ 1.439227] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 1.452261] brd: module loaded
[ 1.456830] loop: module loaded
[ 1.460136] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.467542] Loading iSCSI transport class v2.0-870.
[ 1.473360] usbcore: registered new device driver r8152-cfgselector
[ 1.479664] usbcore: registered new interface driver r8152
[ 1.485177] usbcore: registered new interface driver lan78xx
[ 1.490863] usbcore: registered new interface driver smsc95xx
[ 1.496684] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.502472] dwc_otg: FIQ enabled
[ 1.502474] dwc_otg: NAK holdoff enabled
[ 1.502475] dwc_otg: FIQ split-transaction FSM enabled
[ 1.502478] Module dwc_common_port init
[ 1.502609] usbcore: registered new interface driver uas
[ 1.507947] usbcore: registered new interface driver usb-storage
[ 1.514071] mousedev: PS/2 mouse device common for all mice
[ 1.527392] rpi-rtc soc:rpi_rtc: registered as rtc0
[ 1.533748] rpi-rtc soc:rpi_rtc: setting system clock to 2024-05-10T11:29:38 UTC (1715340578)
[ 1.542659] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 1.549216] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.557882] sdhci: Secure Digital Host Controller Interface driver
[ 1.564089] sdhci: Copyright(c) Pierre Ossman
[ 1.568499] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.574368] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.580438] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.586914] hid: raw HID events driver (C) Jiri Kosina
[ 1.592089] usbcore: registered new interface driver usbhid
[ 1.597682] usbhid: USB HID core driver
[ 1.601850] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[ 1.610246] NET: Registered PF_PACKET protocol family
[ 1.615344] Key type dns_resolver registered
[ 1.624595] registered taskstats version 1
[ 1.628766] Loading compiled-in X.509 certificates
[ 1.636090] Key type .fscrypt registered
[ 1.640117] Key type fscrypt-provisioning registered
[ 1.645816] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[ 1.653086] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
[ 1.662185] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
[ 1.670495] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000
[ 1.678799] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 1.688284] brcm-pcie 1000110000.pcie: Forcing gen 2
[ 1.693476] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[ 1.699944] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.705455] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])
[ 1.716025] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 1.727217] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[ 1.733272] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.739646] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.854200] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC)
[ 1.860863] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
[ 1.866907] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x007f]
[ 1.872507] pci 0000:01:00.0: reg 0x14: [io 0x0000-0x007f]
[ 1.878105] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x007f]
[ 1.883703] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x007f]
[ 1.889301] pci 0000:01:00.0: reg 0x20: [io 0x0000-0x007f]
[ 1.894899] pci 0000:01:00.0: reg 0x24: [mem 0x1b00000000-0x1b00001fff]
[ 1.901545] pci 0000:01:00.0: reg 0x30: [mem 0x1b00000000-0x1b0000ffff pref]
[ 1.908702] pci 0000:01:00.0: PME# supported from D3hot
[ 1.913993] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link)
[ 1.929028] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.935676] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff]
[ 1.942844] pci 0000:01:00.0: BAR 6: assigned [mem 0x1b00000000-0x1b0000ffff pref]
[ 1.950446] pci 0000:01:00.0: BAR 5: assigned [mem 0x1b00010000-0x1b00011fff]
[ 1.957612] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
[ 1.963906] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
[ 1.970547] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
[ 1.976838] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
[ 1.983480] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
[ 1.989771] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
[ 1.996412] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
[ 2.002703] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
[ 2.009344] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
[ 2.015635] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
[ 2.022276] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.027259] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff]
[ 2.034426] pci 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 2.042908] pci 0000:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 2.051445] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 2.057603] pcieport 0000:00:00.0: PME: Signaling with IRQ 39
[ 2.063435] pcieport 0000:00:00.0: AER: enabled with IRQ 39
[ 2.069097] brcm-pcie 1000110000.pcie: clkreq control enabled
[ 2.074918] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 2.081911] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 2.091003] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 2.099306] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 2.107614] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 2.115916] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 2.125291] brcm-pcie 1000120000.pcie: Forcing gen 2
[ 2.130311] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
[ 2.136778] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 2.142285] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 2.152855] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 2.164043] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
[ 2.170093] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 2.176451] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.290197] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 2.296858] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
[ 2.302900] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[ 2.309197] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[ 2.315493] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[ 2.321852] pci 0001:01:00.0: supports D1
[ 2.325873] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 2.342202] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.348850] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[ 2.356017] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[ 2.363189] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[ 2.370357] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[ 2.377524] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 2.382507] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 2.389674] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.398163] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.406691] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 2.412842] pcieport 0001:00:00.0: PME: Signaling with IRQ 40
[ 2.418669] pcieport 0001:00:00.0: AER: enabled with IRQ 40
[ 2.424333] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 2.433422] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 2.442688] rp1 0001:01:00.0: enabling device (0000 -> 0002)
[ 2.449580] rp1 0001:01:00.0: chip_id 0x20001927
[ 2.479568] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 108 (d8:3a:dd:e2:ca:f6)
[ 2.490407] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 2.498999] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.504076] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 2.511781] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 2.520789] xhci-hcd xhci-hcd.0: irq 133, io mem 0x1f00200000
[ 2.526626] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.531698] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 2.538950] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 2.545117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.553420] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.560684] usb usb1: Product: xHCI Host Controller
[ 2.565580] usb usb1: Manufacturer: Linux 6.6.20+rpt-rpi-v8 xhci-hcd
[ 2.571959] usb usb1: SerialNumber: xhci-hcd.0
[ 2.576545] hub 1-0:1.0: USB hub found
[ 2.580320] hub 1-0:1.0: 2 ports detected
[ 2.584483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 2.592785] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.600037] usb usb2: Product: xHCI Host Controller
[ 2.604936] usb usb2: Manufacturer: Linux 6.6.20+rpt-rpi-v8 xhci-hcd
[ 2.611387] usb usb2: SerialNumber: xhci-hcd.0
[ 2.615954] hub 2-0:1.0: USB hub found
[ 2.619725] hub 2-0:1.0: 1 port detected
[ 2.623955] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.629147] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 2.636856] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 2.645973] xhci-hcd xhci-hcd.1: irq 138, io mem 0x1f00300000
[ 2.651809] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.656880] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 2.664243] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 2.670395] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.678798] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.686051] usb usb3: Product: xHCI Host Controller
[ 2.690946] usb usb3: Manufacturer: Linux 6.6.20+rpt-rpi-v8 xhci-hcd
[ 2.697426] usb usb3: SerialNumber: xhci-hcd.1
[ 2.701979] hub 3-0:1.0: USB hub found
[ 2.705753] hub 3-0:1.0: 2 ports detected
[ 2.709904] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 2.718317] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.725569] usb usb4: Product: xHCI Host Controller
[ 2.730493] usb usb4: Manufacturer: Linux 6.6.20+rpt-rpi-v8 xhci-hcd
[ 2.737056] usb usb4: SerialNumber: xhci-hcd.1
[ 2.741604] hub 4-0:1.0: USB hub found
[ 2.745375] hub 4-0:1.0: 1 port detected
[ 2.749989] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.758593] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 2.766636] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 2.774883] platform 1000800000.codec: Adding to iommu group 0
[ 2.780748] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 2.788989] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 2.797402] platform 1000880000.pisp_be: Adding to iommu group 0
[ 2.803469] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 2.811539] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 2.819582] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 2.826916] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.835284] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 2.842747] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 2.850002] platform axi:gpu: Adding to iommu group 1
[ 2.855127] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 2.862406] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 2.869558] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.877917] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 2.885898] mmc1: CQHCI version 5.10
[ 2.885926] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 2.889860] of_cfs_init
[ 2.894680] mmc0: CQHCI version 5.10
[ 2.897221] of_cfs_init: OK
[ 2.903504] clk: Disabling unused clocks
[ 2.938756] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 3.044235] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 3.051135] mmcblk0: mmc0:aaaa SD32G 29.7 GiB
[ 3.056669] mmcblk0: p1 p2
[ 3.059674] mmcblk0: mmc0:aaaa SD32G 29.7 GiB (quirks 0x00004000)
[ 3.084737] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 3.096818] Freeing unused kernel memory: 4864K
[ 3.101435] Run /init as init process
[ 3.105120] with arguments:
[ 3.105124] /init
[ 3.105128] with environment:
[ 3.105129] HOME=/
[ 3.105131] TERM=linux
[ 3.134086] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 3.242102] libata version 3.00 loaded.
[ 3.246608] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 3.247184] ahci 0000:01:00.0: version 3.0
[ 3.253736] ahci 0000:01:00.0: enabling device (0000 -> 0002)
[ 3.261373] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
[ 3.262754] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[ 3.268861] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
[ 3.283677] macb 1f00100000.ethernet end0: renamed from eth0
[ 3.308490] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x3 impl SATA mode
[ 3.318374] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[ 3.331513] scsi host0: ahci
[ 3.335091] scsi host1: ahci
[ 3.338153] scsi host2: ahci
[ 3.341194] scsi host3: ahci
[ 3.344221] scsi host4: ahci
[ 3.347178] ata1: SATA max UDMA/133 abar m8192@0x1b00010000 port 0x1b00010100 irq 168
[ 3.355055] ata2: SATA max UDMA/133 abar m8192@0x1b00010000 port 0x1b00010180 irq 168
[ 3.362950] ata3: DUMMY
[ 3.365406] ata4: DUMMY
[ 3.367867] ata5: DUMMY
[ 3.846203] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.852652] ata1.00: supports DRM functions and may not be fully accessible
[ 3.859644] ata1.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT03B6Q, max UDMA/133
[ 3.867047] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.876195] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 3.881879] ata1.00: supports DRM functions and may not be fully accessible
[ 3.891633] ata1.00: configured for UDMA/133
[ 3.896038] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 870 3B6Q PQ: 0 ANSI: 5
[ 3.904466] ata1.00: Enabling discard_zeroes_data
[ 3.909218] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.916917] sd 0:0:0:0: [sda] Write Protect is off
[ 3.921727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.921740] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.930850] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 3.937306] ata1.00: Enabling discard_zeroes_data
[ 3.942263] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.382204] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.388651] ata2.00: supports DRM functions and may not be fully accessible
[ 4.395643] ata2.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT03B6Q, max UDMA/133
[ 4.403048] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 4.412211] ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 4.417896] ata2.00: supports DRM functions and may not be fully accessible
[ 4.427656] ata2.00: configured for UDMA/133
[ 4.432024] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 870 3B6Q PQ: 0 ANSI: 5
[ 4.440404] ata2.00: Enabling discard_zeroes_data
[ 4.445149] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.452849] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.457658] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.457670] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.466777] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 4.473218] ata2.00: Enabling discard_zeroes_data
[ 4.478170] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.506412] md/raid1:md0: not clean -- starting background reconstruction
[ 4.513251] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.527453] md0: detected capacity change from 0 to 1953260928
[ 4.662190] raid6: neonx8 gen() 7916 MB/s
[ 4.734192] raid6: neonx4 gen() 7850 MB/s
[ 4.806209] raid6: neonx2 gen() 6637 MB/s
[ 4.878202] raid6: neonx1 gen() 5249 MB/s
[ 4.950194] raid6: int64x8 gen() 3497 MB/s
[ 5.022195] raid6: int64x4 gen() 3684 MB/s
[ 5.094193] raid6: int64x2 gen() 3075 MB/s
[ 5.166198] raid6: int64x1 gen() 2536 MB/s
[ 5.170481] raid6: using algorithm neonx8 gen() 7916 MB/s
[ 5.242190] raid6: .... xor() 5985 MB/s, rmw enabled
[ 5.247171] raid6: using neon recovery algorithm
[ 5.252272] xor: measuring software checksum speed
[ 5.258085] 8regs : 9936 MB/sec
[ 5.263456] 32regs : 9853 MB/sec
[ 5.268591] arm64_neon : 12901 MB/sec
[ 5.272962] xor: using function: arm64_neon (12901 MB/sec)
[ 5.278658] async_tx: api initialized (async)
[ 5.330768] Btrfs loaded, zoned=no, fsverity=no
[ 5.500178] EXT4-fs (mmcblk0p2): mounted filesystem a5343e26-ea31-47e7-a3e0-ae56c9afa37a ro with ordered data mode. Quota mode: none.
[ 5.797077] NET: Registered PF_INET6 protocol family
[ 5.802471] Segment Routing with IPv6
[ 5.806154] In-situ OAM (IOAM) with IPv6
[ 5.843850] systemd[1]: systemd 252.17-1~deb12u1+rpi1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 5.877140] systemd[1]: Detected architecture arm64.
[ 5.889177] systemd[1]: Hostname set to <pi5nas>.
[ 5.922390] systemd[1]: Using hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0, device /dev/watchdog0
[ 5.932895] systemd[1]: Watchdog running with a timeout of 14s.
[ 5.964635] uart-pl011 107d001000.serial: no DMA platform data
[ 6.493461] systemd[1]: Queued start job for default target multi-user.target.
[ 6.523134] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 6.531113] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 6.539539] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 6.548874] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 6.557970] systemd[1]: Created slice user.slice - User and Session Slice.
[ 6.565033] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 6.576257] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 6.587077] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 6.599817] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 6.607611] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 6.616683] systemd[1]: Reached target paths.target - Path Units.
[ 6.622920] systemd[1]: Reached target slices.target - Slice Units.
[ 6.629313] systemd[1]: Reached target swap.target - Swaps.
[ 6.634990] systemd[1]: Reached target time-set.target - System Time Set.
[ 6.641965] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 6.650546] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[ 6.658889] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[ 6.666873] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 6.673383] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 6.682270] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 6.691373] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 6.699883] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 6.709047] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 6.716578] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
[ 6.725459] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 6.733792] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 6.742002] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 6.770286] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 6.779320] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 6.788180] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 6.796435] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 6.812407] systemd[1]: Finished blk-availability.service - Availability of block devices.
[ 6.822699] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 6.833199] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 6.843234] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 6.853942] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.868035] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[ 6.878314] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 6.888057] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[ 6.897263] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 6.907349] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ 6.907860] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[ 6.925161] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[ 6.933045] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
[ 6.933528] fuse: init (API version 7.39)
[ 6.950354] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 6.972797] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 6.982951] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 6.992728] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
[ 7.005178] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 7.016204] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 7.027290] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 7.038392] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 7.043639] EXT4-fs (mmcblk0p2): re-mounted a5343e26-ea31-47e7-a3e0-ae56c9afa37a r/w. Quota mode: none.
[ 7.057323] systemd[1]: Started systemd-journald.service - Journal Service.
[ 7.115097] systemd-journald[340]: Received client request to flush runtime journal.
[ 7.663766] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.663818] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.702104] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.707890] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 7.708444] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 7.708530] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 7.708957] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 7.712814] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 7.713143] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 7.713457] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.713763] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 7.745976] mc: Linux media interface: v0.10
[ 7.749519] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 7.753438] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 7.759257] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 7.760445] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 7.760584] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 7.763129] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 7.789912] macb 1f00100000.ethernet end0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 7.789923] macb 1f00100000.ethernet end0: configuring for phy/rgmii-id link mode
[ 7.792758] pps pps0: new PPS source ptp0
[ 7.792829] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 7.824500] videodev: Linux video capture interface: v2.00
[ 7.825154] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 7.827342] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.827860] usbcore: registered new interface driver brcmfmac
[ 7.865372] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 7.889886] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700
[ 7.889897] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
[ 7.889900] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000
[ 7.889902] pispbe 1000880000.pisp_be: Register nodes for group 0
[ 7.890027] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
[ 7.890074] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
[ 7.890112] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
[ 7.890149] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
[ 7.890183] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
[ 7.890780] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
[ 7.892893] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
[ 7.892968] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
[ 7.893009] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
[ 7.893566] pispbe 1000880000.pisp_be: Register nodes for group 1
[ 7.897824] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[ 7.903260] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
[ 7.903351] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
[ 7.903416] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
[ 7.903473] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
[ 7.903694] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
[ 7.903926] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
[ 7.904142] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
[ 7.904213] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
[ 7.904432] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
[ 7.940796] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.955985] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 8.018806] brcmfmac_wcc: brcmf_wcc_attach: executing
[ 8.022280] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 8.022543] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 8.042340] Bluetooth: Core ver 2.22
[ 8.042374] NET: Registered PF_BLUETOOTH protocol family
[ 8.042376] Bluetooth: HCI device and connection manager initialized
[ 8.042384] Bluetooth: HCI socket layer initialized
[ 8.042388] Bluetooth: L2CAP socket layer initialized
[ 8.042394] Bluetooth: SCO socket layer initialized
[ 8.046294] rpivid 1000800000.codec: Device registered as /dev/video19
[ 8.156530] Bluetooth: HCI UART driver ver 2.3
[ 8.156542] Bluetooth: HCI UART protocol H4 registered
[ 8.156575] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 8.156721] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 8.156776] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 8.156990] Bluetooth: HCI UART protocol Broadcom registered
[ 8.470143] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 8.474287] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 8.475609] Registered IR keymap rc-cec
[ 8.475661] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[ 8.475717] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input1
[ 8.478319] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input2
[ 8.479411] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 8.482462] Registered IR keymap rc-cec
[ 8.482511] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[ 8.482564] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input3
[ 8.488206] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input4
[ 8.488310] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 8.488462] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 8.488546] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 8.488634] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 8.488702] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 8.489399] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[ 8.491393] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 8.498040] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 8.500010] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 8.510946] Bluetooth: hci0: BCM: chip id 107
[ 8.511157] Bluetooth: hci0: BCM: features 0x2f
[ 8.512240] Bluetooth: hci0: BCM4345C0
[ 8.512245] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 8.526667] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[ 8.563701] md: resync of RAID array md0
[ 9.119021] EXT4-fs (md0): mounted filesystem 632de5c5-8adc-4451-abf3-74c9f04230fa r/w with ordered data mode. Quota mode: journalled.
[ 9.230848] Bluetooth: hci0: BCM: features 0x2f
[ 9.232215] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 9.232218] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 9.232508] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[ 10.918878] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS
[ 11.036763] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.036770] Bluetooth: BNEP filters: protocol multicast
[ 11.036775] Bluetooth: BNEP socket layer initialized
[ 11.038581] Bluetooth: MGMT ver 1.22
[ 11.042657] NET: Registered PF_ALG protocol family
[ 11.899390] macb 1f00100000.ethernet end0: Link is Up - 1Gbps/Full - flow control tx
[ 28.878311] systemd[1321]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set