DigiView-Android icon indicating copy to clipboard operation
DigiView-Android copied to clipboard

Published 20 hours ago • verified publisher icon fpvout

Digiview App Stuck at "Waiting for Video"

Open mughu94 opened this issue 3 years ago • 11 comments

I have been trying, unsuccessfully, to get the digiview app to work with my V2 goggles.

I have tried multiple USB C <> USB C cables 3 (all "data" cables). I have to go into my USB settings on the phone and switch from "charge only" to a full usb connection, but the app still just says "Waiting for video"

Anyone else have this problem? Any cable recommendations that are confirmed to be working?

mughu94 avatar May 10 '22 10:05 mughu94

Try to disable the low power mode when the aircraft is unarmed

gonsp avatar May 10 '22 10:05 gonsp

I can't get my V1 goggles to work either. Stuck on waiting for video. Tried disabling low power mode, still no luck.

tavdog avatar May 18 '22 10:05 tavdog

Never mind, combination of lower power disable, 50mbps and unplug replug got it working.

tavdog avatar May 18 '22 10:05 tavdog

So to recap: It is incompatible with 50mbits - and low power mode? Did you try to plug in the android device after takeoff (when it's in normal power mode)? I really like the low-power mode, otherwise it gets very hot

AndKe avatar May 28 '22 12:05 AndKe

So to recap: It is incompatible with 50mbits - and low power mode? Did you try to plug in the android device after takeoff (when it's in normal power mode)? I really like the low-power mode, otherwise it gets very hot

For me 50mbits is required for it work. And disable low-power is also required. I have not tried to plug android in after arming though but I think that would work.

tavdog avatar May 28 '22 19:05 tavdog

@tavdog https://oscarliang.com/dji-fpv-goggles-video-out/ does mention that you can use low-power mode if you connect cable after takeoff :)

AndKe avatar May 28 '22 20:05 AndKe

@mughu94 Have you had success ? If so please close this issue.

tavdog avatar May 28 '22 20:05 tavdog

I've found it works with low power mode ON, but to get the picture after takeoff the usb cable must reinserted and the picture shows up.

nikiatanasov avatar Nov 02 '22 18:11 nikiatanasov

I dont know if it is possible to retry the video automaticali from the app without the need for reconnecting after arming the quad?

Dunsteer avatar Aug 03 '23 18:08 Dunsteer

I dont know if it is possible to retry the video automatically from the app without the need for reconnecting after arming the quad?

If I remember correctly, It's a limitation on the DJI goggles side. When no feed is displayed, the app is still trying to communicate with the goggles at regular interval. We can't do much more, and the connection needs to be physically 'reset' to get the video feed stack on DJI side reinitialized.

jlucidar avatar Aug 04 '23 06:08 jlucidar

I tried resetting it and nothing happened. That's weird. Does it have something to do that I am using O3 with goggles V2?

Dunsteer avatar Aug 04 '23 10:08 Dunsteer