Logic Analyzer: results on all 4 channels are shown even though only one channel is physically connected

[marcnause]

Actual Behaviour

The Logic Analyzer displays results for all 4 channels, even though only LA1 is physically connected to a source.

Expected Behaviour

The Logic Analyzer only shows a result for channels which are connected to a source.

Steps to reproduce it

1. Connect LA1 to Square Wave 4
2. Open app (if it has not opened automatically
3. Select Wave Generator
4. Set frequency and duty cycle for Square Wave 4
5. Press "play" symbol on top of screen
6. Select Logic Analyzer
7. Change Channel Selection to 4
8. Press "Analyze" button

Screenshots of the issue

Would you like to work on the issue?

Maybe

Additional information

I tested with PSLab v5 with firmware version 3.0.2.

[marcnause]

I tested again. I selected 4 channels.

If connected to LA1 I get the same result as described above. If connected to LA2 I get a result for LA2 only. If connected to LA3 I get a result for LA3 only. If connected to LA4 I get no result.

I also tried with 3 channels. If connected to LA1 I get results on LA1, LA2 and LA3 If connected to LA2 I get a result for LA2 only. If connected to LA3 I get no result.

[AsCress]

@marcnause Thanks for testing ! These are exactly the kind of outputs that I'm getting with the V6.