arduino add seeedunio xiao to boards.h please

add seeedunio xiao to boards.h please

Open robobibble opened this issue 5 years ago • 15 comments
hi could you add the seeeduino xiao to boards.h please
thanks lee
Dec 04 '20 12:12 robobibble
Hey,
You can add the following to boards.h to support the XIAO.
Cheers,
// Seeduino XIAO

#elif defined(SEEED_XIAO_M0) #define TOTAL_ANALOG_PINS 11 #define TOTAL_PINS 17 // 11 digital / analog + 1 DAC output + 2 i2c + 3 spi #define VERSION_BLINK_PIN LED_BUILTIN #define PIN_SERIAL1_RX 7 #define PIN_SERIAL1_TX 6 #define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) <= 10) #define IS_PIN_ANALOG(p) ((p) >= 0 && (p) <= 10) #define IS_PIN_PWM(p) ((p) >= 1 && (p) <= 10) #define IS_PIN_SERVO(p) (IS_PIN_DIGITAL(p) && (p) < MAX_SERVOS) // deprecated since v2.4 #define IS_PIN_I2C(p) ((p) == 4 || (p) == 5) // SDA = 4, SCL = 5 #define IS_PIN_SPI(p) ((p) == 4 || (p) == 10 || (p) == 9 || (p) == 8) // SS = A4 #define IS_PIN_SERIAL(p) ((p) == 6 || (p) == 7) #define PIN_TO_DIGITAL(p) (p) #define PIN_TO_ANALOG(p) (p) #define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) #define PIN_TO_SERVO(p) (p) // deprecated since v2.4
Feb 08 '21 13:02 Vicckkky
Hi, the above mentioned code works perfectly for the Seeeduino XIAO, which was added in the boards.h file. However, the code was not detected by the "elif" line, showing the name of the Seeduino. I tried it with (SEEED_XIAO_M0) and (Seeeduino_XIAO) and with or without the _M0. Finally I prepared a special boards.h file, replacing "elif" before "define" with "else". This worked, because only the parameters of the Seeeduino Board were used. But with this trick I need for every board type a manipulated boards.h file What am I doing wrong, that the right board ist not detected automatically? Any idea? Thanks Gerhard
Aug 11 '21 13:08 gerhard1951
You might find the correct name to use in the compiler output. Look in the compiler output for a parameter that starts with -D. You can also post the compiler output here if you don't find it. Make sure the output is set to verbose (in the IDE preferences).
Aug 11 '21 18:08 pgrawehr
Thanks! I found the correct name in the compiler output: "ARDUINO-SEEED-XIAO-M0" works!
Aug 12 '21 04:08 gerhard1951
Would be great if you could create a PR for this, but preferably on ConfigurableFirmata, as this repo is not being actively maintained at this time.
Aug 12 '21 16:08 pgrawehr
To clarify, we would appreciate your contribution to this library. It is being maintained, but not advanced.
Any contributions here will help all those using Firmata via the Arduino IDE.
Aug 13 '21 04:08 zfields
I am willing to contribute, but never before I did a PR. I have to learn first how to make a PR.
My Seeduino board worked with the following definition: // Seeeduino XIAO #elif defined(ARDUINO_SEEED_XIAO_M0)
My NANO EVERY board as follows: //ARDUINO_NANO_EVERY Board
#elif defined(ARDUINO_AVR_NANO_EVERY )
Aug 14 '21 05:08 gerhard1951
I'm not having luck with this. I copied & pasted, to the end of the existing boards list, Vickkkkys block along with gerhard1951 corrected name to my board.h that I brought local to my project for testing. I continue to get several warnings and error : Please edit Boards.h with a hardware abstraction for this board.
Feb 13 '24 06:02 al-davis
@al-davis Please post the build log (make sure to enable verbose output first). That will help in understanding the problem.
Feb 13 '24 07:02 pgrawehr
Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "Seeeduino XIAO, Arduino, Off"
C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\User\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\User\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\User\Documents\Arduino\libraries -fqbn=Seeeduino:samd:seeed_XIAO_m0:usbstack=arduino,debug=off -ide-version=10819 -build-path C:\Users\User\AppData\Local\Temp\arduino_build_859572 -warnings=default -build-cache C:\Users\User\AppData\Local\Temp\arduino_cache_231637 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.bossac.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\bossac\1.8.0-48-gb176eee -prefs=runtime.tools.bossac-1.7.0-arduino3.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\bossac\1.7.0-arduino3 -prefs=runtime.tools.arduinoOTA.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.arduinoOTA-1.2.1.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arm-none-eabi-gcc\7-2017q4 -prefs=runtime.tools.arm-none-eabi-gcc-7-2017q4.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arm-none-eabi-gcc\7-2017q4 -prefs=runtime.tools.bossac-1.8.0-48-gb176eee.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\bossac\1.8.0-48-gb176eee -prefs=runtime.tools.CMSIS.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS\5.4.0 -prefs=runtime.tools.CMSIS-5.4.0.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS\5.4.0 -prefs=runtime.tools.CMSIS-Atmel.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1 -prefs=runtime.tools.CMSIS-Atmel-1.2.1.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1 -prefs=runtime.tools.openocd.path=C:\Users\User\Documents\ArduinoData\packages\arduino\tools\openocd\0.10.0-arduino7 -prefs=runtime.tools.openocd-0.10.0-arduino7.path=C:\Users\User\Documents\ArduinoData\packages\arduino\tools\openocd\0.10.0-arduino7 -verbose C:\Users\User\Documents\Arduino\WaveShareDemoMin\WaveShareDemoMin.ino

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\arduino-builder -compile -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware -hardware C:\Users\User\Documents\ArduinoData\packages -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\hardware\tools\avr -tools C:\Users\User\Documents\ArduinoData\packages -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\User\Documents\Arduino\libraries -fqbn=Seeeduino:samd:seeed_XIAO_m0:usbstack=arduino,debug=off -ide-version=10819 -build-path C:\Users\User\AppData\Local\Temp\arduino_build_859572 -warnings=default -build-cache C:\Users\User\AppData\Local\Temp\arduino_cache_231637 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.bossac.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\bossac\1.8.0-48-gb176eee -prefs=runtime.tools.bossac-1.7.0-arduino3.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\bossac\1.7.0-arduino3 -prefs=runtime.tools.arduinoOTA.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.arduinoOTA-1.2.1.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arduinoOTA\1.2.1 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arm-none-eabi-gcc\7-2017q4 -prefs=runtime.tools.arm-none-eabi-gcc-7-2017q4.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\arm-none-eabi-gcc\7-2017q4 -prefs=runtime.tools.bossac-1.8.0-48-gb176eee.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\bossac\1.8.0-48-gb176eee -prefs=runtime.tools.CMSIS.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS\5.4.0 -prefs=runtime.tools.CMSIS-5.4.0.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS\5.4.0 -prefs=runtime.tools.CMSIS-Atmel.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1 -prefs=runtime.tools.CMSIS-Atmel-1.2.1.path=C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1 -prefs=runtime.tools.openocd.path=C:\Users\User\Documents\ArduinoData\packages\arduino\tools\openocd\0.10.0-arduino7 -prefs=runtime.tools.openocd-0.10.0-arduino7.path=C:\Users\User\Documents\ArduinoData\packages\arduino\tools\openocd\0.10.0-arduino7 -verbose C:\Users\User\Documents\Arduino\WaveShareDemoMin\WaveShareDemoMin.ino

Using board 'seeed_XIAO_m0' from platform in folder: C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1

Using core 'arduino' from platform in folder: C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1

Detecting libraries used...

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for Adafruit_SharpMem.h: [[email protected]]

ResolveLibrary(Adafruit_SharpMem.h)

  -> candidates: [[email protected]]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for Adafruit_GFX.h: [[email protected]]

ResolveLibrary(Adafruit_GFX.h)

  -> candidates: [[email protected]]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for Adafruit_I2CDevice.h: [[email protected]]

ResolveLibrary(Adafruit_I2CDevice.h)

  -> candidates: [[email protected]]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for Wire.h: [[email protected]]

ResolveLibrary(Wire.h)

  -> candidates: [[email protected]]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for SPI.h: [[email protected]]

ResolveLibrary(SPI.h)

  -> candidates: [[email protected]]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for Adafruit_ZeroDMA.h: [[email protected]]

ResolveLibrary(Adafruit_ZeroDMA.h)

  -> candidates: [[email protected]]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for Firmata.h: [[email protected]]

ResolveLibrary(Firmata.h)

  -> candidates: [[email protected]]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

Alternatives for epd4in2.h: [WaveShape_4in2]

ResolveLibrary(epd4in2.h)

  -> candidates: [WaveShape_4in2]

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master\\Adafruit_SharpMem.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\Adafruit_GFX.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\Adafruit_GrayOLED.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\Adafruit_SPITFT.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\glcdfont.c" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO\\Adafruit_BusIO_Register.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO\\Adafruit_I2CDevice.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO\\Adafruit_SPIDevice.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire\\Wire.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI\\SPI.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA\\utility" "C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA\\Adafruit_ZeroDMA.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\Firmata.cpp" -o nul

Error while detecting libraries included by C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\FirmataMarshaller.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\FirmataParser.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility\\BLEStream.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility\\BluefruitLE_SPI_Stream.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility\\EthernetClientStream.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility\\EthernetServerStream.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility\\SerialFirmata.cpp" -o nul

Error while detecting libraries included by C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\utility\SerialFirmata.cpp

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility\\WiFiStream.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\epd4in2.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\epdif.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\epdpaint.cpp" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\font12.c" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\font16.c" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\font20.c" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\font24.c" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\font8.c" -o nul

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2\\imagedata.cpp" -o nul

Generating function prototypes...

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -w -x c++ -E -CC -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\preproc\\ctags_target_for_gcc_minus_e.cpp"

"C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\preproc\\ctags_target_for_gcc_minus_e.cpp"

Compiling sketch...

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\sketch\\WaveShareDemoMin.ino.cpp.o"

In file included from C:\Users\User\Documents\Arduino\WaveShareDemoMin\WaveShareDemoMin.ino:3:0:

C:\Users\User\Documents\Arduino\WaveShareDemoMin\Boards.h:859:0: warning: "PIN_SERIAL1_RX" redefined

 #define PIN_SERIAL1_RX 7

 

In file included from C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\cores\arduino/delay.h:24:0,

                 from C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\cores\arduino/Arduino.h:84,

                 from C:\Users\User\AppData\Local\Temp\arduino_build_859572\sketch\WaveShareDemoMin.ino.cpp:1:

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\variants\XIAO_m0/variant.h:169:0: note: this is the location of the previous definition

 #define PIN_SERIAL1_RX       (7ul)

 

In file included from C:\Users\User\Documents\Arduino\WaveShareDemoMin\WaveShareDemoMin.ino:3:0:

C:\Users\User\Documents\Arduino\WaveShareDemoMin\Boards.h:860:0: warning: "PIN_SERIAL1_TX" redefined

 #define PIN_SERIAL1_TX 6

 

In file included from C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\cores\arduino/delay.h:24:0,

                 from C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\cores\arduino/Arduino.h:84,

                 from C:\Users\User\AppData\Local\Temp\arduino_build_859572\sketch\WaveShareDemoMin.ino.cpp:1:

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\variants\XIAO_m0/variant.h:168:0: note: this is the location of the previous definition

 #define PIN_SERIAL1_TX       (6ul)

 

In file included from C:\Users\User\Documents\Arduino\WaveShareDemoMin\WaveShareDemoMin.ino:13:0:

C:\Users\User\Documents\Arduino\libraries\WaveShape_4in2/epd4in2.h:64:0: warning: "GET_STATUS" redefined

 #define GET_STATUS                                  0x71

 

In file included from C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\cores\arduino/Arduino.h:174:0,

                 from C:\Users\User\AppData\Local\Temp\arduino_build_859572\sketch\WaveShareDemoMin.ino.cpp:1:

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\cores\arduino/USB/USBCore.h:23:0: note: this is the location of the previous definition

 #define GET_STATUS     0

 

Compiling libraries...

Compiling library "Adafruit_SHARP_Memory_Display-master"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master\\Adafruit_SharpMem.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_SHARP_Memory_Display-master\\Adafruit_SharpMem.cpp.o"

Compiling library "Adafruit_GFX_Library"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-gcc" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\glcdfont.c" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_GFX_Library\\glcdfont.c.o"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\Adafruit_GFX.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_GFX_Library\\Adafruit_GFX.cpp.o"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\Adafruit_GrayOLED.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_GFX_Library\\Adafruit_GrayOLED.cpp.o"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library\\Adafruit_SPITFT.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_GFX_Library\\Adafruit_SPITFT.cpp.o"

Compiling library "Adafruit_BusIO"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO\\Adafruit_BusIO_Register.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_BusIO\\Adafruit_BusIO_Register.cpp.o"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO\\Adafruit_I2CDevice.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_BusIO\\Adafruit_I2CDevice.cpp.o"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO\\Adafruit_SPIDevice.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_BusIO\\Adafruit_SPIDevice.cpp.o"

Compiling library "Wire"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire\\Wire.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Wire\\Wire.cpp.o"

Compiling library "SPI"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI\\SPI.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\SPI\\SPI.cpp.o"

Compiling library "Adafruit_ZeroDMA"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA\\utility" "C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA\\Adafruit_ZeroDMA.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Adafruit_ZeroDMA\\Adafruit_ZeroDMA.cpp.o"

Compiling library "Firmata"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\FirmataParser.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Firmata\\FirmataParser.cpp.o"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\Firmata.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Firmata\\Firmata.cpp.o"

"C:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -mcpu=cortex-m0plus -mthumb -c -g -Os -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD "-D__SKETCH_NAME__=\"\"\"WaveShareDemoMin.ino\"\"\"" -DF_CPU=48000000L -DARDUINO=10819 -DARDUINO_SEEED_XIAO_M0 -DARDUINO_ARCH_SAMD -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" -DARDUINO_SAMD_ZERO -D__SAMD21__ -D__SAMD21G18A__ -DARM_MATH_CM0PLUS -DSEEED_XIAO_M0 -DUSB_VID=0x2886 -DUSB_PID=0x802F -DUSBCON -DUSB_CONFIG_POWER=100 "-DUSB_MANUFACTURER=\"Seeed\"" "-DUSB_PRODUCT=\"Seeed XIAO M0\"" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/Core/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS\\5.4.0/CMSIS/DSP/Include/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\tools\\CMSIS-Atmel\\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\cores\\arduino" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\variants\\XIAO_m0" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_SHARP_Memory_Display-master" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_GFX_Library" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\Adafruit_BusIO" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Wire" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\SPI" "-IC:\\Users\\User\\Documents\\ArduinoData\\packages\\Seeeduino\\hardware\\samd\\1.8.1\\libraries\\Adafruit_ZeroDMA" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata" "-IC:\\Users\\User\\Documents\\Arduino\\libraries\\WaveShape_4in2" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\utility" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\\libraries\\Firmata\\FirmataMarshaller.cpp" -o "C:\\Users\\User\\AppData\\Local\\Temp\\arduino_build_859572\\libraries\\Firmata\\FirmataMarshaller.cpp.o"

In file included from C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.h:17:0,

                 from C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:18:

Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"

 #error "Please edit Boards.h with a hardware abstraction for this board"

  ^~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h: In function 'unsigned char readPort(byte, byte)':

Boards.h:886:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin + 0))) out |= 0x01;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:886:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin + 0))) out |= 0x01;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:886:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin + 0))) out |= 0x01;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:886:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin + 0))) out |= 0x01;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

Boards.h:887:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin + 1))) out |= 0x02;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:887:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin + 1))) out |= 0x02;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:887:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin + 1))) out |= 0x02;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:887:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin + 1))) out |= 0x02;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

Boards.h:888:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin + 2))) out |= 0x04;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:888:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin + 2))) out |= 0x04;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:888:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin + 2))) out |= 0x04;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:888:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin + 2))) out |= 0x04;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

Boards.h:889:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin + 3))) out |= 0x08;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:889:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin + 3))) out |= 0x08;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:889:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin + 3))) out |= 0x08;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:889:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin + 3))) out |= 0x08;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

Boards.h:890:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin + 4))) out |= 0x10;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:890:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin + 4))) out |= 0x10;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:890:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin + 4))) out |= 0x10;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:890:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin + 4))) out |= 0x10;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

Boards.h:891:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin + 5))) out |= 0x20;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:891:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin + 5))) out |= 0x20;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:891:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin + 5))) out |= 0x20;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:891:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin + 5))) out |= 0x20;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

Boards.h:892:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin + 6))) out |= 0x40;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:892:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin + 6))) out |= 0x40;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:892:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin + 6))) out |= 0x40;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:892:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin + 6))) out |= 0x40;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

Boards.h:893:7: error: 'IS_PIN_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin + 7))) out |= 0x80;

       ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:893:7: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin + 7))) out |= 0x80;

       ^~~~~~~~~~~~~~

       PIO_DIGITAL

Boards.h:893:66: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if (IS_PIN_DIGITAL(pin + 7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin + 7))) out |= 0x80;

                                                                  ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:893:66: note: suggested alternative: 'PIO_DIGITAL'

   if (IS_PIN_DIGITAL(pin + 7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin + 7))) out |= 0x80;

                                                                  ^~~~~~~~~~~~~~

                                                                  PIO_DIGITAL

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h: In function 'unsigned char writePort(byte, byte, byte)':

Boards.h:933:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x01)) digitalWrite(PIN_TO_DIGITAL(pin + 0), (value & 0x01));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:933:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x01)) digitalWrite(PIN_TO_DIGITAL(pin + 0), (value & 0x01));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

Boards.h:934:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x02)) digitalWrite(PIN_TO_DIGITAL(pin + 1), (value & 0x02));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:934:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x02)) digitalWrite(PIN_TO_DIGITAL(pin + 1), (value & 0x02));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

Boards.h:935:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x04)) digitalWrite(PIN_TO_DIGITAL(pin + 2), (value & 0x04));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:935:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x04)) digitalWrite(PIN_TO_DIGITAL(pin + 2), (value & 0x04));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

Boards.h:936:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x08)) digitalWrite(PIN_TO_DIGITAL(pin + 3), (value & 0x08));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:936:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x08)) digitalWrite(PIN_TO_DIGITAL(pin + 3), (value & 0x08));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

Boards.h:937:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x10)) digitalWrite(PIN_TO_DIGITAL(pin + 4), (value & 0x10));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:937:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x10)) digitalWrite(PIN_TO_DIGITAL(pin + 4), (value & 0x10));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

Boards.h:938:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x20)) digitalWrite(PIN_TO_DIGITAL(pin + 5), (value & 0x20));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:938:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x20)) digitalWrite(PIN_TO_DIGITAL(pin + 5), (value & 0x20));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

Boards.h:939:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x40)) digitalWrite(PIN_TO_DIGITAL(pin + 6), (value & 0x40));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:939:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x40)) digitalWrite(PIN_TO_DIGITAL(pin + 6), (value & 0x40));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

Boards.h:940:38: error: 'PIN_TO_DIGITAL' was not declared in this scope

   if ((bitmask & 0x80)) digitalWrite(PIN_TO_DIGITAL(pin + 7), (value & 0x80));

                                      ^~~~~~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h:940:38: note: suggested alternative: 'PIO_DIGITAL'

   if ((bitmask & 0x80)) digitalWrite(PIN_TO_DIGITAL(pin + 7), (value & 0x80));

                                      ^~~~~~~~~~~~~~

                                      PIO_DIGITAL

In file included from C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:18:0:

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.h: At global scope:

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.h:124:20: error: 'TOTAL_PINS' was not declared in this scope

     byte pinConfig[TOTAL_PINS];

                    ^~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.h:124:20: note: suggested alternative: 'TOTAL_PORTS'

     byte pinConfig[TOTAL_PINS];

                    ^~~~~~~~~~

                    TOTAL_PORTS

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.h:125:18: error: 'TOTAL_PINS' was not declared in this scope

     int pinState[TOTAL_PINS];

                  ^~~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.h:125:18: note: suggested alternative: 'TOTAL_PORTS'

     int pinState[TOTAL_PINS];

                  ^~~~~~~~~~

                  TOTAL_PORTS

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp: In member function 'byte firmata::FirmataClass::getPinMode(byte)':

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:476:10: error: 'pinConfig' was not declared in this scope

   return pinConfig[pin];

          ^~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp: In member function 'void firmata::FirmataClass::setPinMode(byte, byte)':

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:488:7: error: 'pinConfig' was not declared in this scope

   if (pinConfig[pin] == PIN_MODE_IGNORE)

       ^~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:488:7: note: suggested alternative: 'config'

   if (pinConfig[pin] == PIN_MODE_IGNORE)

       ^~~~~~~~~

       config

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:491:3: error: 'pinConfig' was not declared in this scope

   pinConfig[pin] = config;

   ^~~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:491:3: note: suggested alternative: 'config'

   pinConfig[pin] = config;

   ^~~~~~~~~

   config

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp: In member function 'int firmata::FirmataClass::getPinState(byte)':

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:500:10: error: 'pinState' was not declared in this scope

   return pinState[pin];

          ^~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:500:10: note: suggested alternative: 'getPinState'

   return pinState[pin];

          ^~~~~~~~

          getPinState

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp: In member function 'void firmata::FirmataClass::setPinState(byte, int)':

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:511:3: error: 'pinState' was not declared in this scope

   pinState[pin] = state;

   ^~~~~~~~

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Firmata.cpp:511:3: note: suggested alternative: 'getPinState'

   pinState[pin] = state;

   ^~~~~~~~

   getPinState

Using library Adafruit_SHARP_Memory_Display-master at version 1.1.3 in folder: C:\Users\User\Documents\Arduino\libraries\Adafruit_SHARP_Memory_Display-master 

Using library Adafruit_GFX_Library at version 1.11.9 in folder: C:\Users\User\Documents\Arduino\libraries\Adafruit_GFX_Library 

Using library Adafruit_BusIO at version 1.15.0 in folder: C:\Users\User\Documents\Arduino\libraries\Adafruit_BusIO 

Using library Wire at version 1.0 in folder: C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\libraries\Wire 

Using library SPI at version 1.0 in folder: C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\libraries\SPI 

Using library Adafruit_ZeroDMA at version 1.0.4 in folder: C:\Users\User\Documents\ArduinoData\packages\Seeeduino\hardware\samd\1.8.1\libraries\Adafruit_ZeroDMA 

Using library Firmata at version 2.5.8 in folder: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata 

Using library WaveShape_4in2 in folder: C:\Users\User\Documents\Arduino\libraries\WaveShape_4in2 (legacy)

exit status 1

#error "Please edit Boards.h with a hardware abstraction for this board"
Feb 13 '24 15:02 al-davis
In addition to above here is a snippet to show where & how the adds where made to board.h
// Adafruit Bluefruit nRF52 boards #elif defined(ARDUINO_NRF52_ADAFRUIT) #define TOTAL_ANALOG_PINS NUM_ANALOG_INPUTS #define TOTAL_PINS 32 #define VERSION_BLINK_PIN LED_BUILTIN #define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) #define IS_PIN_ANALOG(p) ((p) == PIN_A0 || (p) == PIN_A1 || (p) == PIN_A2 || (p) == PIN_A3 ||
(p) == PIN_A4 || (p) == PIN_A5 || (p) == PIN_A6 || (p) == PIN_A7) #define IS_PIN_PWM(p) digitalPinHasPWM(p) #define IS_PIN_SERVO(p) IS_PIN_DIGITAL(p) #define IS_PIN_I2C(p) ((p) == PIN_WIRE_SDA || (p) == PIN_WIRE_SCL) #define IS_PIN_SPI(p) ((p) == SS || (p)== MOSI || (p) == MISO || (p == SCK)) #define PIN_TO_DIGITAL(p) (p) #define PIN_TO_ANALOG(p) ( ((p) == PIN_A0) ? 0 : ((p) == PIN_A1) ? 1 : ((p) == PIN_A2) ? 2 : ((p) == PIN_A3) ? 3 :
((p) == PIN_A4) ? 4 : ((p) == PIN_A5) ? 5 : ((p) == PIN_A6) ? 6 : ((p) == PIN_A7) ? 7 : (127)) #define PIN_TO_PWM(p) (p) #define PIN_TO_SERVO(p) (p)
// Seeeduino XIAO #elif defined(ARDUINO_SEEED_XIAO_M0) #define TOTAL_ANALOG_PINS 11 #define TOTAL_PINS 17 // 11 digital / analog + 1 DAC output + 2 i2c + 3 spi #define VERSION_BLINK_PIN LED_BUILTIN #define PIN_SERIAL1_RX 7 #define PIN_SERIAL1_TX 6 #define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) <= 10) #define IS_PIN_ANALOG(p) ((p) >= 0 && (p) <= 10) #define IS_PIN_PWM(p) ((p) >= 1 && (p) <= 10) #define IS_PIN_SERVO(p) (IS_PIN_DIGITAL(p) && (p) < MAX_SERVOS) // deprecated since v2.4 #define IS_PIN_I2C(p) ((p) == 4 || (p) == 5) // SDA = 4, SCL = 5 #define IS_PIN_SPI(p) ((p) == 4 || (p) == 10 || (p) == 9 || (p) == 8) // SS = A4 #define IS_PIN_SERIAL(p) ((p) == 6 || (p) == 7) #define PIN_TO_DIGITAL(p) (p) #define PIN_TO_ANALOG(p) (p) #define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) #define PIN_TO_SERVO(p) (p) // deprecated since v2.4
// anything else #else #error "Please edit Boards.h with a hardware abstraction for this board" #endif
// as long this is not defined for all boards: #ifndef IS_PIN_SPI #define IS_PIN_SPI(p) 0 #endif
#ifndef IS_PIN_SERIAL #define IS_PIN_SERIAL(p) 0 #endif
Feb 13 '24 15:02 al-davis
Hmm.... That should work. Maybe you edited the wrong file. The file you are suposed to edit is C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.57.0_x86__mdqgnx93n4wtt\libraries\Firmata\Boards.h
Feb 13 '24 15:02 pgrawehr
Well, that is the file I started with. I brought a copy into the same space as the .ino file and edited it. Also changed the #include in the .ino file from #include <Boards.h> to #include "Boards.h" . Now I'm wondering is some of the firma files are getting the original boards.h. I'll go check into that.
Feb 13 '24 16:02 al-davis
Yes that is an issue. Now I'm trying to sort thru permissions hell. My projects/IDE aren't in Administrator space but all these files are. Thanks for your help, I'll let you know.
Feb 13 '24 16:02 al-davis
OK, that got it to compile. I appreciate you jumping in to help.
Feb 13 '24 16:02 al-davis
arduino arduino copied to clipboard

add seeedunio xiao to boards.h please

arduino
arduino copied to clipboard
