Chris G4NAB_F5VMR

playTone 440 500 100 seems to have no output - Should this be 440 100 500 which does?

In my experience there is no need to run svxlink in a read only system. I have nodes that have run successfully for at least three years. I am using...

Ok understood. In 15 years of svxlink, I have had only two real failures, but this has been to the user of inferior brands and speeds. A10 cards of well...

As I and some others generally build without QT in the CMAKE command, this has no effect even using 24.02. but maybe in the future this will have to be...

Hello, First note is that you have PTT_HANGTIME=1000 which means it stays on for 1000 Milliseconds, suggest you reduce it to 10 or even 0. Are you UK based? Chris...

Certainly - if you ensure the DEEMPHASIS=0 in the [Rx1] that may help. Chris > On 10 Apr 2024, at 22:36, phlpittsny ***@***.***> wrote: > > > > Thanks... I'll...

That is very odd. Of course I'm using MultiTx with Darkice streaming the repeater outputs but have no problem with it stopping when it should. I'll look more closely for...

Hi. I am using the latest core from sm0svx. This is my output and config. Is there something on the udp stream holding the tx open? I am seen nothing...

You have probably looked already but MultiTx:state is called from ReflectorLogic.cpp only once at line 711, referring to MultiTx.cpp line 323. So if the state change is not notified then...

I went back through the logs over the past week and found no incorrect issues of the phenomenon. I have a couple of Swedish stations that connect on a regular...