Chris G4NAB_F5VMR

The playSound and other commands are found in the .tcl logic files. Unless you know what your doing and copy the files to a new directory called local to protect...

The only file you should look at is Logic.tcl being attentive to syntax. Chris On Mon, 16 Aug 2021, 08:54 hayden-t, ***@***.***> wrote: > where is play method ? i...

Since using the ReflectorLogic, I've have never encountered any difficulty with DTMF either in sending or muting, provided DEEMPHASIS=0 is set. With this parameter set to 1 some tones fail,...

I do not know the version number you are using. I am using svxlink 19.09.2, that had version 2 of the reflector protocol with TalkGroups. All stations are connected to...

This is true! The only issue I have had recently is the inability of compiling QT with Debian 11 onwards, but that is resolved simply by not including it in...

That is correct. Once the daemon is running, or you are running the svxlink.service, the DTMF tones have to be by RF. For the SVXReflector there is a special case...

When I upgraded all the repeaters under my administration in France, RRF became an impossibility due to the difference in protocol. I have completely upgraded their network to work with...

From my perspective I see that CARD_CHANNELS=1 must be uncommented. Then check with aplay -l what the usb sound card number is exactly. It will be either 0 or 1...

You might want to consider creating a loopback dummy sound card. This will feed back input to output directly. I use this function to echo output of a repeater to...

I'm unsure of the pin numbering on an orange pi, but the physical pin numbers on a raspberry pi do not indicate the GPIO pin, for example GPIO 10 is...