f1ac0

Actually most ESP pinout cheat-sheets have RTS and CTS signals for UART0, on the pins that I stated in my previous post https://www.pinterest.com/pin/747738344362958328/ https://stackoverflow.com/questions/46722951/wemos-esp8266-function-while As you said, it might be...

An addition to my previous message, yes there seem to be a hardware flow control. there is sample code and links to docs from espressif in the pages of this...

Here is an update and a good news after I had a look inside the source files. A configuration to enable hardware flow control is already available in include/driver/uart.h !...

Hi, And first, keirf, thank you for your great firmware. Back to the original enhancement topic : it should be even possible to use the four drive select signals in...

Hello David. Thanks for your message. Actually I own two "standard" goteks. One came with the LCD, and it has this extra pin hole. The second one is newer, came...

I was in fact confused by the two connector formats: I always connected the drive with shugart pinout on my Greaseweazle and it worked so far. However your reply pointed...

> Probably not related to the error you describe, but for the benefit of anyone trying to build this on recent Ubuntu (e.g. 21.10) and having trouble: I had to...

Hi. I am happy to have feedback from a PiStormX user. Thank you for sharing your experience with the A2000, which seems to prove that the PiStormX-DMA logic is working....

I recommend installing only boards+firmware that are aware of bus arbitration/DMA/bus master inside systems or with expansion boards that use it. Otherwise both the CPU board and expansion boards will...

>I found on one of the forums that the prelude works on a2k with the original pi storm What I see in original PiStorm logic is that bus arbitration signals...