extremecoders-re

> Unfortunately, not all firmware images work out of the box. Manual modification may be needed on a case by case basis. > > First try increasing the timeout value...

Ideally, this tool should be run in a Virtual Machine so that specifying the password is not an issue. If not you can use an older version which asks for...

The sudoers password. However the reason for recommending a VM is not just this. During emulation the script will set up a TAP interface for the emulated firmware image. So...

You need to get hold of a statically compiled gdbserver and somehow push it to the firmware image. Like you can do this by repacking the firmware or transfer it...

The patch is in place to support Ubuntu 18.04 which defaults to Python2 for the `python` command. 18.04 goes out of support on April and we should be good to...

Try increasing the timeout to 120 seconds in inferNetwork.sh https://github.com/firmadyne/firmadyne/blob/748fdec9a8eb716fbb9598404389211aed8c987a/scripts/inferNetwork.sh#L40

Yes this is a known issue. Please see https://github.com/attify/firmware-analysis-toolkit/issues/50

This is a delayed response, but anyway. `Connection refused` typically indicates: the web server is not running, running but listening on a different port, or there's a firewall blocking the...

Please check the SOCKS version. Go dispatch proxy only supports SOCKS **v5**.

Unfortunately windows only support SOCKS4, not SOCKS5. However if you're using a browser like Firefox you can specify the SOCKS5 proxy in Firefox Options. For Chrome you can use an...