discip

@hugovincent Did you manage to get your **`TS100`** to run again? @Ralim As you might recall I had a similar issue from the beginning. (exactly as @hugovincent stated above, except...

@hugovincent ## Great! 😃👍 Then it would be appropriate to close this issue. 😊 Thanks in advance!

@Devnol I used the ST-Link solution, but I am not sure what exactly I did do to get it running back then. All I know is that you need to...

Does your **`TS80P`** run on a ST-chip? Or is it GD?

Ah, ok? The only devices I have at hand are a **`TS80P`** and a **`Pinecil_V1`**. So you will have to wait than.

@Devnol To flash the firmware: 1. Download the latest [firmware](https://github.com/Ralim/IronOS/suites/11587617034/artifacts/600523881), 2. unzip the corresponding xxx.dfu 3. and run for example: ``` dfu-util -D TS100_EN.dfu ``` To flash a boot-logo: 1....

Is your iron up and running again?

> You should probably make a note on the docs that flashing the ironos dfu bootloader without unlocking the mcu first will cause it to erase itself and be bricked...

I got that. Just needed to let him know. 😊

Have you tried another PC yet?