discip

> Is this on the S60/S60P? Its missing at the moment as there is nothing to show in it (not settings are applicable yet) But could we then set **`PD...

It delays the CJC calibration. At least I think that it is caused by **`PD timeout`**. Don't know what else could cause this. 🤷‍♂️

> Can you try and flash the S60P _runtime_ in the bootloader Nice approach, will definitely try. But than it should be the _old runtime_, that one prior to the...

@Ralim Flashing the **`runtime.dfu`** worked as expected, but unfortunately in **`DFU RUNTIME`** flashing the **`bootloader.dfu`** didn't work: ``` dfu-util -D bootloader.dfu dfu-util 0.11 Copyright 2005-2009 Weston Schmidt, Harald Welte and...

> can you try and flash the runtime from this Unfortunately that didn't work.

@Ralim Not sure how to approach this, but have you had by any chance time to think about a viable solution to revive my **`TS80P`**? 😊 thanks in advance

> Best answer is SWD over the usb-c port. No clue what that might mean. 😓 What am I supposed to do?

@Ralim Please help I'm not able to get the **`TS80P`** back to life.

@Ralim I don't know what I'm doing wrong here, but if I use the ST-link, no uploads are possible despite the device being connected, no matter which setting I use....

@yw4z ## First of all thank you for putting all the effort into improving this side of OrcaSlicer. 😃👍🚀 If I'am allowed to add my 2 cents here: Some observations...