David Watson

@bengAThome Noting this repo appears dead, I've created a fork which I intent to try and maintain moving forward. I've added your suggestions to the doco, let me know if...

@CRCinAU I'm sure there is. Noting this repo appears dead, I've created a fork which I hope to keep updated. If you want to open an issue there, and have...

You may be quite right about the HACs piece. I might put together a pull-request to automatically roll the daily rainfall into the next day (rather than relying on an...

> I can send and receive data from the tub now, however if I send some commands like changing the jet speed, or pressing the time button, it gets stuck...

Thanks @netmindz I've managed to get it going! I believe there may be an error in the install instructions currently (wrt wiring). Currently the diagram has the spa Pin 5...

Further to this sorry @netmindz, I have identified that it is getting stuck in a loop when trying to command. This could be 100% related to my setup now that...

Thanks @netmindz! Currently powering the RS485 adapter (MAX485) through a voltage regulator (set to 5v), feeding from the spa molex. The data pins are set to 3v3 (for the ESP32)....

Totally fair with the OTA updates. Sorry - I gave my pins from memory - i should have checked beforehand. It's setup correctly (I think): MAX485 > ESP32 - RO...

> This commit _might_ help you [14bbd7a](https://github.com/netmindz/balboa_GL_ML_spa_control/commit/14bbd7a591cbade982c3f7c901f64148ef804cb9) @davewatson91 Thanks @netmindz. I'm away until next week currently, but a quick look at that commit just now - I wasn't getting into...

> Hi @davewatson91 - Can you see if the sending of commands now works for you now this fix has been applied. [e2edeea](https://github.com/netmindz/balboa_GL_ML_spa_control/commit/e2edeeacd5be723fd308765fd5e26a9eb10ff8d9) I've just spent a bit of time...