Difficulties in drawing generation.

[sreekaribh]

Hello CsGoh, The Processpiper library is working only for 4 connections irrespective of the incoming and outgoing paths. In my case, I have 5 connections for the single task [B] for which it is failing to draw. Regarding this issue I made few changes in the shape.py file [shortest_source_coord.connected = False] which is drawing fine but the two tasks [E, F] are overlapping after these changes. So, kindly guide me with solution. Please refer the diagram.

Thanks

[csgoh]

Hi @sreekaribh, the limit of 4 connection per element is by design. According to BPMN best practice, an element should be connected either left, right, top, or bottom. If you have more than 4 connections (incoming and outgoing), it is better to add another gateway element to fan out.

You can see the previously closed issue here: https://github.com/csgoh/processpiper/issues/17

Hope this helps.

[csgoh]

Closing the issue as there is no further response.