Creality-Cloud-RaspberryPi3
Creality-Cloud-RaspberryPi3 copied to clipboard
crealitycloud
This project has been discontinued and is no longer being maintained. Users are advised to use https://github.com/crealitycloud/OctoPrint-CrealityCloud-With-Video or https://github.com/crealitycloud/O...
**Describe the bug** No qr code is generated at install. **To Reproduce** install as described in the README\ **Expected behavior** At end of install, README indicates that a qr code...
**Describe the bug** Follow the readme to install the service on a freshly imaged RPi (with Raspbian) after running `creatlity_install` command no verification code is generated. Additionally CrealityCloud Android App...
I am struggling to get my Creality camera working with this and the Creality Cloud app. Fresh install of the latest version fo Raspberry Pi. Nothing else installed. Installed Creality...
During printing, the process is interrupted by bringing the axes to Home All and interrupting everything. On the CR-200B there is the latest update released by Creality, while CrealityPi is...
I have a problem with the connection of the creality ender 5 plus printer, the printer is connected to my raspberry pi and when I enter the command "sudo ./creality_install",...
Hi do you think there will be an octoprint plugin for Creality cloud and if so when do you think it will be out?
机型识别有问题
**Describe the bug** 机型识别有问题（CR-100是没有热床的机器）通过该项目链接树莓派后能正确识别成CR-100，但是app打印的时候居然出现热床选项，并且一直卡在等待热床温度. **To Reproduce** Steps to reproduce the behavior: 1. 树莓派安装该项目，链接CR-100，绑定app（自动识别成功CR-100型号） 2. app选择切片开始打印 3. 出现4个问题 问题1：CR-100机器没有热床，app内开始打印一直等待热床温度，热床那一项一直转圈圈无法继续； 问题2.：CR-100机器在app的待机状态和打印状态都无法看到当前的喷头温度和热床温度，一直在获取中（不知道是不是受到问题1的影响，导致喷头的温度也无法正常返回）； 问题3：CR-100机器在app内不管是打印状态还是待机状态都无法控制风扇开关； 问题4.：CR-100机器开始打印后无法在app内显示剩余时间 **Expected behavior** 希望修复一下这些问题.没有热床的机型应该屏蔽热床这个选项，比如app内置灰，并且打印流程也不能卡住一直等待热床响应。 **Desktop (please complete the following information):**...
**Describe the bug** I had no trouble at all getting the pi linked to my creality cloud account. However, when I attempt to start a print it gets stuck on...
I'm using a Raspberry Pi 4, running Raspbian 64-bit (aarch64) At the beginning, when I tried to run creality_install, it gave me "GenerateIdentifier: No such file or directory". Then I...
Metadata
Owner
Metadata
This project has been discontinued and is no longer being maintained. Users are advised to use https://github.com/crealitycloud/OctoPrint-CrealityCloud-With-Video or https://github.com/crealitycloud/O...