nmap-nse-scripts
nmap-nse-scripts copied to clipboard
cldrn
smb-vuln-ms17-010.nse threw an error! is this expected?
Hi, thanks for a great script. Can you assist in resolving this: mrp@user:/usr/share/nmap/scripts$ nmap -p445 --script=smb-vuln-ms17-010.nse 192.168.1.9 -d
Starting Nmap 7.01 ( https://nmap.org ) at 2017-09-05 14:24 IST --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0
NSE: Using Lua 5.2. NSE: Arguments from CLI: NSE: Loaded 1 scripts for scanning. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating NSE at 14:24 Completed NSE at 14:24, 0.00s elapsed Initiating Ping Scan at 14:24 Scanning 192.168.1.9 [2 ports] Completed Ping Scan at 14:24, 0.00s elapsed (1 total hosts) Overall sending rates: 14705.88 packets / s. mass_rdns: Using DNS server 127.0.1.1 Initiating Parallel DNS resolution of 1 host. at 14:24 mass_rdns: 0.10s 0/1 [#: 1, OK: 0, NX: 0, DR: 0, SF: 0, TR: 1] Completed Parallel DNS resolution of 1 host. at 14:24, 0.02s elapsed DNS resolution of 1 IPs took 0.10s. Mode: Async [#: 1, OK: 0, NX: 1, DR: 0, SF: 0, TR: 1, CN: 0] Initiating Connect Scan at 14:24 Scanning 192.168.1.9 [1 port] Discovered open port 445/tcp on 192.168.1.9 Completed Connect Scan at 14:24, 0.00s elapsed (1 total ports) Overall sending rates: 4716.98 packets / s. NSE: Script scanning 192.168.1.9. NSE: Starting runlevel 1 (of 1) scan. Initiating NSE at 14:24 NSE: Starting smb-vuln-ms17-010 against 192.168.1.9. NSE: [smb-vuln-ms17-010 192.168.1.9] SMB: Added account '' to account list NSE: [smb-vuln-ms17-010 192.168.1.9] SMB: Added account 'guest' to account list NSE: [smb-vuln-ms17-010 192.168.1.9] LM Password: NSE: [smb-vuln-ms17-010 192.168.1.9] SMB: Invalid NTLM challenge message: unexpected signature. NSE: [smb-vuln-ms17-010 192.168.1.9] SMB: WARNING: the server appears to be Unix; your mileage may vary. NSE: [smb-vuln-ms17-010 192.168.1.9] SMB: Extended login to 192.168.1.9 as USER\guest failed, but was given guest access (username may be wrong, or system may only allow guest) NSE: [smb-vuln-ms17-010 192.168.1.9] Connected to share 'IPC$' NSE: smb-vuln-ms17-010 against 192.168.1.9 threw an error! /usr/bin/../share/nmap/scripts/smb-vuln-ms17-010.nse:101: attempt to call field 'pack' (a nil value) stack traceback: /usr/bin/../share/nmap/scripts/smb-vuln-ms17-010.nse:101: in function 'check_ms17010' /usr/bin/../share/nmap/scripts/smb-vuln-ms17-010.nse:177: in function </usr/bin/../share/nmap/scripts/smb-vuln-ms17-010.nse:155> (...tail calls...)
Completed NSE at 14:24, 0.02s elapsed Nmap scan report for 192.168.1.9 Host is up, received conn-refused (0.00011s latency). Scanned at 2017-09-05 14:24:20 IST for 0s PORT STATE SERVICE REASON 445/tcp open microsoft-ds syn-ack Final times for host: srtt: 105 rttvar: 3758 to: 100000
NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating NSE at 14:24 Completed NSE at 14:24, 0.00s elapsed Read from /usr/bin/../share/nmap: nmap-payloads nmap-services. Nmap done: 1 IP address (1 host up) scanned in 0.35 seconds mrp@user:/usr/share/nmap/scripts$ nmap -version Nmap version 7.01 ( https://nmap.org ) Platform: x86_64-pc-linux-gnu Compiled with: liblua-5.2.4 openssl-1.0.2g libpcre-8.38 libpcap-1.7.4 nmap-libdnet-1.12 ipv6 Compiled without: Available nsock engines: epoll poll select
