btsimonh

all free - it should go swimingly - but these things never do! In theory, platform.io will automatically download tools and libraries as required - just open this project folder,...

not used it for years; but should be ok. It is apparently free for small code (which this should be...), and it should at least work - platform.io can be...

> @btsimonh how did you fried your board? bad soldering? bad connections? stupidity. The 'on' button connector carries 36v, not 3.3. Had a flying lead on it so i could...

that looks very much like one of the board pair that I torched :(. My advice is look on ebay for a new motherboard set with the single motherboard that...

yes, that repo. HB = 'Hoverboard'. i.e. the main feature of THIS repo over the original is that I implemented actual HoverBoard functionality; as well as our more rigorous machine...

I did not try to flash the boards I had - mainly tried various ways to extract the firmware, and failed (even wrote an ESP firmware to do nefarious things...

oh - download the GD32 manual, but also the STM32 manual. You will find they number things differently in the manual, but that the code is the same :). I...

yep, me the same on saving money :). if you already have 4 boards, adding the cost of 2 x motherboard kits makes the hobby not attractive.... good luck, and...

haha - not a clue. gnd is easy, 3.3 should be easy, guess the others with little danger? (or check out the pinout in the other repo to see how...

hi @bshowket, so, if i interpret correctly, you will use the arduino to interpret PWM (e.g. from a servo output of a remote control), and will generate commands from the...