BIGTREETECH

> Thanks. In general, it looks fine to me. I did notice a couple of minor things: > > 1. For what it is worth, I find the pin names...

OK, we have joined the plan

> > Tested on Mega2560, it can control i2c devices normally, but even without the i2c_delay function, the occupancy rate of the mcu is still 100%, so it is not...

> Thanks. I guess my main question is - which users are expected to utilize this and what hardware is it expected that they will use it with? Is this...

The diodes used previously were not very high in parameters and there was a chance that they would break through when the customer was using them in a harsh environment...

 Hello, please confirm whether all the dial switches are set to off

comment out `WIFI_SSID` and `WIFI_PASSWD` whit `#` in `/BOOT/systm.cfg`. run `sudo rm /etc/NetworkManager/system-connections/*` to remove all historical wifi connections. After restarting, WiFi will not be automatically connected.

It seems that there are different issues being reported: 1.) Signal fails after a particular number of LEDs. This can be a certain number when not printing and this number...

> > 1.) The OP is experiencing point 1 and so are many others. This is a limitation of the CPU being used on any given board. > > This...

This can happen if both USB power and the main 24V power are applied to the board at the same time and the USB jumper is inserted. It would result...