midTbot_esp32

midTbot_esp32 copied to clipboard

plot file(s) with push button(s) ?

2

hi all, i`m asking for a possible (firmware) extension: there are a few unused gpio`s on the esp32...could them be used to start different plot files by pushing buttons (internal...

snug11

Suggestion - heavier set-screw pen

1

I am finding that a heavier/weightier set-screw on the pen improves performance. E.g. https://nl.aliexpress.com/item/33013216975.html - M5 x 16mm - see https://vimeo.com/353804260.

dirkx

Unstable Y axis

2

My midTbot is working great, but I've noticed that there is an increase in vertical play as the head gets further away from the X axis. It's up to around...

Kartoffel

I have a small batch of midTbot controller kits available on [Tindie](https://www.tindie.com/products/33366583/midtbot-esp32-v1-controller-kit/). 

bdring

patch - some minor instruction updates

1

Hm - seem unable to do a PR on the wiki - possible suggestion below. Dw. https://github.com/dirkx/midTbot_esp32.wiki.git https://github.com/dirkx/midTbot_esp32/wiki commit 0b3bfede5c0680eb9977cf97de8946958ef01d95 (HEAD -> master) Author: Dirk-Willem van Gulik Date: Wed Aug...

dirkx

Looking at the step file V2 the idler pulleys on the carriage are slightly misaligned with those of the frame.  Is this deliberate? Thanks nik

nikthefix