bdring

@LukasGossmann Do you have a special need for an OPT response? The concept does not fit FluidNC very well and we are thinking about dropping the command entirely. FluidNC does...

We have some changes coming to the install process. We should wait until those are tested and then update this. References to specific versions should be removed as it can...

It is not finished yet. I will post them soon. What are your thoughts on mounting holes. I thought a flange could be added to the sides. Another thought is...

I don't like the cover mounting. It make it difficult to remove when mounted. I made 2 versions. I can post them both. Side mount  Internal mount 

The files have been added to the Repo. https://github.com/bdring/6-Pack_CNC_Controller/tree/main/3D_Files/case Click on the files to use GitHub's 3D viewer.

There is an SD socket on the controller. See this for [FluidNC](https://github.com/bdring/FluidNC/wiki/SD-Card)

Thanks for the tip on AP64350SP-13

Do you have a reference schematic?

A branch has been created to test this feature. https://github.com/bdring/FluidNC/tree/ProbeFeature

With TMC2130, if you use 5V Vcc it will send 5V SPI and Diag to the ESP32. Use the level shifting. If the level shifters cannot drive current on the...