CDS customer request to load ds2482 module automatically for UniPi Neuron (Raspberry Pi 3)

[klutchell]

trafficstars

The device type UniPi Neuron has a i2c-to-one-wire converter built in. It is a DS2482 connected to raspberry pi i2c-1 port. the dt overlay is available at /mnt/boot/overlays and also activated in the device configuration. /mnt/boot/config.txt shows that the configuration from balena cloud ist applied to the device. But the kernel module is not loaded and the one wire bus at /sys/bus/w1 not available. If I call modprobe ds2482 on the host after boot, the module is loaded, devices created and connected temperature sensor working. For Custom Device Support we had contact with Rafael Morillo and Mark Corbin.

[jellyfish-bot]

[klutchell] This issue has attached support thread https://jel.ly.fish/b16f4008-e3e9-4d75-a6dd-774dbdc9d989