[TC-440] Blink_Nicla.ino compiles for Nicla Sense, but not Nicla Vision

[aliphys]

Background info

According to https://github.com/arduino/arduino-examples/issues/47 there is a special Blink.ino for the Nicle Sense ME, which according to https://docs.arduino.cc/software/ide-v1/tutorials/getting-started/cores/arduino-mbed_nicla also applies to the Nicla Vision. This is called Blink_Nicla.ino.

It can be found in this repo here: https://github.com/arduino/ArduinoCore-mbed/blob/master/libraries/Nicla_System/examples/Blink_Nicla/Blink_Nicla.ino

Expected behaviour I can compile the Blink_Nicla.ino sketch to both the Nicla Sense ME as well as the Nicla Vision

Current Behaviour When the Nicla Sense ME is selected, IDE 2 compiles without error. However, when compiling for the Nicla Vision, it fails to compile.

Error message is as below

In file included from C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/Nicla_System.h:6:0,
                 from C:\Users\user\AppData\Local\Temp\.arduinoIDE-unsaved2023030-12348-k6zwi4.8tz8\Blink_Nicla\Blink_Nicla.ino:1:
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected identifier before numeric constant
 #define Mode 1
              ^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/interfaces/InterfaceCAN.h:150:10: note: in expansion of macro 'Mode'
     enum Mode {
          ^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected unqualified-id before numeric constant
 #define Mode 1
              ^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/interfaces/InterfaceCAN.h:150:10: note: in expansion of macro 'Mode'
     enum Mode {
          ^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected identifier before numeric constant
 #define Mode 1
              ^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/CAN.h:171:14: note: in expansion of macro 'Mode'
     int mode(Mode mode);
              ^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected ',' or '...' before numeric constant
 #define Mode 1
              ^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/CAN.h:171:14: note: in expansion of macro 'Mode'
     int mode(Mode mode);
              ^

exit status 1

Compilation error: exit status 1

[facchinm]

Nicla Vision doesn't have the LED on external I2C controller, so it can use the normal blink. Best thing we can do is adding an #error directive when compiling Nicla_System library for Nicla Vision, so the error is more precise.

[aliphys]

@facchinm So something like this?

#ifdef ARDUINO_NICLA_VISION
  #error "Run the standard Blink.ino sketch for the Nicla Vision"

[facchinm]

yup

[deemano]

Nicla Vision doesn't have the LED on external I2C controller, so it can use the normal blink. Best thing we can do is adding an #error directive when compiling Nicla_System library for Nicla Vision, so the error is more precise.

What do you mean by it can you the normal Blink? Q: It's there any reason why compiling is very slow for Vision? [using the latest Arduino IDE]