ESP32-S3 Core panic (Store prohibited) in Adafruit_USBD_Device::addInterface line 237

[PumaFPV]

Operating System

Windows 11

Arduino IDE version

PlatformIO 3.4.4

Board

ESP32-S3-DevKitC-1 v1.0

ArduinoCore version

6.1.15 - ESP core 6.8.1

TinyUSB Library version

3.1.3 and 3.3.3

Sketch as ATTACHED TXT

I used the hid_gamepad.ino provided with the library

Compiled Log as ATTACHED TXT

ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT) Saved PC:0x42023a7a #0 0x42023a7a in esp_pm_impl_waiti at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_pm/pm_impl.c:855

SPIWP:0xee mode:DIO, clock div:1 load:0x3fce3808,len:0x4bc load:0x403c9700,len:0xbd8 load:0x403cc700,len:0x2a0c entry 0x403c98d0 Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled.

Core 1 register dump: PC : 0x42023342 PS : 0x00060630 A0 : 0x82001f66 A1 : 0x3fcebbe0
A2 : 0x00000000 A3 : 0x3fc94a4c A4 : 0x3fc94b64 A5 : 0x00000000 A6 : 0x3fcf25cc A7 : 0x00000000 A8 : 0x00000001 A9 : 0x3fcebbc0 A10 : 0x00000019 A11 : 0x00000000 A12 : 0x00000000 A13 : 0x00000000
A14 : 0x00060820 A15 : 0x00000001 SAR : 0x0000001d EXCCAUSE: 0x0000001d EXCVADDR: 0x00000002 LBEG : 0x400570e8 LEND : 0x400570f3 LCOUNT : 0x00000000

Backtrace: 0x4202333f:0x3fcebbe0 0x42001f63:0x3fcebc00 0x420018e5:0x3fcebc20 0x4200439e:0x3fcebc50 #0 0x4202333f in Adafruit_USBD_Device::addInterface(Adafruit_USBD_Interface&) at .pio/libdeps/esp32-s3-devkitc-1/Adafruit TinyUSB Library/src/arduino/Adafruit_USBD_Device.cpp:237 #1 0x42001f63 in Adafruit_USBD_HID::begin() at .pio/libdeps/esp32-s3-devkitc-1/Adafruit TinyUSB Library/src/arduino/hid/Adafruit_USBD_HID.cpp:150 #2 0x420018e5 in setup() at src/main.cpp:52 #3 0x4200439e in loopTask(void*) at C:/Users/Nico/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:42

ELF file SHA256: 0e4bc72d5abbf624

What happened ?

When flashing the example gamepad code, the ESP32-S3 is stuck in a boot loop

How to reproduce ?

flash the gamepad example code in the ESP32-S3 and monitor the debug uart.

env file content for platformIO: [env:esp32-s3-devkitc-1] platform = espressif32 board = esp32-s3-devkitc-1 framework = arduino lib_deps = adafruit/Adafruit TinyUSB Library @ 3.3.3 monitor_speed = 115200 monitor_filters = esp32_exception_decoder

Note the error mentionned as the log

(I can't even reproduce on arduino IDE as it fails to compile)

Debug Log

No response

Screenshots

No response

[PumaFPV]

In version 3.1.3 the error is in the file Adafruit_USBD_Device.cpp line 237 and in version 3.3.3 it is in the same file but line 228. The specific line is: tusb_desc_configuration_t *config = (tusb_desc_configuration_t *)_desc_cfg;

[pavloshargan]

Did you manage to solve @PumaFPV ?

[PumaFPV]

Nope, I've stayed on my ESP32S2... I have no idea on how to fix this, it is above my skills...

[hathach]

not reproducible with arduino-esp32 v3.2.0 and tinyusb 3.5.0, please update your setup and try again