slower (400Mbits) then only my Cable (800Mbits)

[iEddie-cmd]

Expected Behavior

Faster with 2 WAN

Current Behavior

I have a Gigabit Cable + 100Mbit 5g Connection. But with openmptcprouter i am slower Download Speeds (400Mbits) then only my Cable (800Mbits).

-> Upload speeds got increased just fine. From 53Mbits + 80Mbits -> 120 Mbits. Any ideas why and how to solve it?

Specifications

• OpenMPTCProuter version: <openmptcprouter v0.62-6.6 r0+28431-92e020b50f
• OpenMPTCProuter VPS version: 6.12.15-x64v3-xanmod1 0.1032
• OpenMPTCProuter VPS provider: IONOS, VPS XS 1 Core
• OpenMPTCProuter platform: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
• Country: Germany

[Ysurac]

What is the connection set as master ? should be cable connection How do you test speed ?

[iEddie-cmd]

Yes. Cable is master. Speedtest done by Ookla® with cable conneciton directly inside the asus router behind openmptcproouter.

[YcarusHospital]

Can you try, via SSH on the router, with omr-test-speed <interface> (you can find interface via multipath command) on each interface ?

[iEddie-cmd]

eth1 Best server is http://speedtest.frankfurt.linode.com/garbage.php?ckSize=10000, running test: % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1024M 0 1024M 0 0 107M 0 --:--:-- 0:00:09 --:--:-- 109M

eth2 Best server is http://speedtest.frankfurt.linode.com/garbage.php?ckSize=10000, running test: % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 344M 0 344M 0 0 15.2M 0 --:--:-- 0:00:22 --:--:-- 16.5M^C

[YcarusHospital]

And without interface specified ?

[iEddie-cmd]

Best server is http://speedtest.frankfurt.linode.com/garbage.php?ckSize=10000, running test: % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1024M 0 1024M 0 0 66.3M 0 --:--:-- 0:00:15 --:--:-- 68.5M

[Ysurac]

Can you check during a omr-test-speed without interfaces in Network->MPTCP, Bandwidth tab if more than one interface is used ? It's to check if aggregation is working.

[iEddie-cmd]

It seems like.

wan2 (LTE)	Current:	33.39 Mbit/s(4.17 MB/s)	Average:	33.83 Mbit/s(4.23 MB/s)	Peak:	50.52 Mbit/s(6.31 MB/s)
wan1 (Cable)	Current:	430.8 Mbit/s(53.85 MB/s)	Average:	453.66 Mbit/s(56.71 MB/s)	Peak:	591.43 Mbit/s(73.93 MB/s)
total	Current:	442.61 Mbit/s(55.33 MB/s)	Average:	475.68 Mbit/s(59.46 MB/s)	Peak:	598.95 Mbit/s(74.87 MB/s)

[github-actions[bot]]

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 5 days