T-Display-S3
T-Display-S3 copied to clipboard
Xinyuan-LilyGO
half of the display with garbage
Hi, I have two t-display-s3 boards one is working fine and the other one is having half of the screen with garbage and a black mask. I have tried everything but when I upload a sketch with Arduino 2 it is not displayed on the entire screen. I am not so good in MCU and did not find a way to reset to factory default. Help would be appreciated.
This may not be possible, as it may be a screen burning phenomenon similar to OLED.
I have broken my lcd while placing it on a breadboard. Where do I find a replacement screen, and can you suggest how to remove the broken screen from the board?
These are fragile screens. I have several that fall apart due to warmer climates. They are easy to pull apart, or in my case, fall apart. I would be interested in replacement displays also.
Same here, it "broke" when plugging into a breadboard. I guess the flatband connector is really finnicky, especially the lower part where the data lines are. I wonder if the version with Touch is more stable?
Well, it's 35€ here, so I won't do that when it is that easy to break by putting it into a breadboard… it still works as a "normal" S3 development board, which is good.
This issue is stale because it has been open for 30 days with no activity.
![github-actions[bot] avatar](https://avatars.githubusercontent.com/in/15368?v=4 "Published by a pub.dev verified publisher"){kind=small}
Well, it's 35€ here, so I won't do that when it is that easy to break by putting it into a breadboard… it still works as a "normal" S3 development board, which is good.
Minus all the pins used up by the display :(
This issue is stale because it has been open for 30 days with no activity.
This issue was closed because it has been inactive for 14 days since being marked as stale.