PulseSensor_Amped_Arduino

PulseSensor_Amped_Arduino copied to clipboard

BPM is giving way too high value

5

I am using the STM32f103c8 microcontroller using Arduino software with a pulse sensor and the value its showing is way too high it's going from 2000 to 4000. I am...

msaibhvani

My pulse sensor is giving too high value(Around 1840). Please help me.  This is the sensor I'm using (Bought it from ROBU.IN): Pulse Sensor sent by ROBU in ![Pulse...

sreenu926

Code would not load - errors

7

Hello, I've tried to run the code as is. There are several errors I've seen trying to run it. (I'm using an Arduino UNO). Most of the errors seem to...

project-science

Example code does not compile on either Arduino Zero or MKR1000

4

Hey guys, I work on hobby projects mostly and got the Pulse sensor to do some biomedical hacks. While the example works on the older Arduino's(Mega,UNO), The code throws a...

viggi1000

…te Variance, including: SDNN, SDSD, RMSSD, NN50, PNN50.

ElliotMebane

@biomurph Hello, I am using Sensor Playground Library. (Getting_BPM_to_Monitor code), I have pasted the code down below, as soon as I upload the code, I see the output in serial...

ANJALI2022

Inconsistent BPM readings

22

I've changed the code to output only the bpm with the directions that were posted on a prior post and the readings are very inconsistent. It's clear that the sensor...

showmethemooney

Hello, I am using arduino uno. I had face a problem that from the pulse sensor, it shows BPM reach to 200 + when not touching, and also another things...

AndrewTan90

Issue with sensor voltage

1

Using the PulseSensor_BPM example, I was able to get the BPM effortlessly at first, however, after a few days I did the same thing again, but this time the values...

HarrisL2

BPM sometimes shoots up without a change in heart beat

9

I have a problem similar to at least two others that have been reported (but I couldn't find a solution so far). The bpm output of the sensor sometimes goes...

jens-k