PiPicoRFID

Code and modified library to Read/Write data in MIFARE RFID Cards and Tokens using Raspberry Pi Pico Microcontroller and MFRC522 Module. Written in MicroPython.

Pinout

Raspberry Pi Pico

SRC:https://datasheets.raspberrypi.com/pico/Pico-R3-A4-Pinout.pdf

RC522 RFID Module

SRC:https://microcontrollerslab.com/wp-content/uploads/2020/01/RC522-RFID-CARD-READERS-Pinout.png

Hardware Connection (RC522 to Pico)

Set-up MicroPython in Pico

To set-up Pico with micropython READ THIS PDF

source : https://datasheets.raspberrypi.com/pico/raspberry-pi-pico-python-sdk.pdf (27 May 2022, 20:10 IST)

Modules

Run the modules via minicom or other serial interface. serial interface on Pico will interact with MicroPython To learn how to communicate with MicroPython of Pico in Windows using WSL, read THIS ARTICLE.

readRFID

This module is used to read data from RFID card, to use

import readRFID
readRFID.RUN()

writeRFID

This module will write 16bytes of data at address 0x08, this can be changed at -

stat = rdr.write(8, b"\x44\xFF\x4d\x6f\xFF\x47\xFF\x49\x6d\x6d\x55\xFF\x73\x4a\x44\x65")

Then run the module -

import writeRFID
writeRFID.RUN()

KeyGen

PS PiPicoRFID\src> python3 .\KeyGen.py
Key : RYhpNkAgIpBmbrL9
HexData to Write : "\x52\x59\x68\x70\x4e\x6b\x41\x67\x49\x70\x42\x6d\x62\x72\x4c\x39"

SampleRFIDScanner

import SampleRFIDScanner
SampleRFIDScanner.RUN()

CloneCardData

import CloneCardData
CloneCardData.RUN()

Project Report and Presentation

1. Project Report (DOCX->PDF)
2. Presentation (PPTX->PDF)