TS100 Temp sensor off by 500°C

[jorislue]

Discussed in https://github.com/Ralim/IronOS/discussions/1031

^{Originally posted by jorislue August 26, 2021} Hey, i tried several times to re-flash and to calibrate the temperature sensor, but on the current TS100 2.15 Build and also with 2.14 i get the following screen:

calibrating the temp in the advanced settings didn't change anything :/ It works fine with the standard firmware. Connected /w 19V DC Power Supply

Edit: i just checked on the firmware: the temp sensor states -50°C when on room temp

[jorislue]

This might be a duplicate of #1027 Nevertheless, the original firmware temp reading is also off. Nevertheless, the soldering seems to work fine and the temp readings for soldering seem to be accurate - i could melt my 60/40 solder at 190°C and it was solid /w 170°C so there the readings were probably ok.

I attached a pic with removed back-cover since you asked for it in #1027

[discip]

@jorislue Good morning Sir, if this is fixed for you, please close this issue.

thanks in advance