PricelessToolkit

Hi, YAML is ok, for programming use https://web.esphome.io/ and for testing use a power supply.  The problem could be due to several things 1. Wrong file format "legacy vs...

The default config working perfectly, it is not a config problem. Can you try to flash the blink example into the board with Arduino IDE and select those configs for...

Ok, let's fix that! 1. **Check Python Installation**: Open CMD and type `python`, then press Enter. If you see output like `Python 3.9....`, Python is installed. 2. **Install Python**: If...

Then, Skip the Arduino IDE part and try flashing ESPHome.

Unfortunately, the only solution in this case is to replace the ESP32 module. sorry!

"ESP32 ESP-WROOM-32" https://fr.aliexpress.com/item/32899182878.html

You can send it to me and I will repair it for free.

https://www.lcsc.com/product-detail/WiFi-Modules_Ai-Thinker-ESP32-S_C277944.html

The primary issue with the sensors I encountered involves a 1MΩ resistor that is installed but lacks a proper connection, and reading values dropping too slowly, I installed 1MΩ resistors...

OMG!!! thanks for letting me know. PS: Should I make my own sample sensors? but I can't produce with such low prices.