armed/disarmed by user None

[george2asenov]

Alarm system

Magellan MG5050 IP150. Panel Identified MG5050 version 4.16 build 20 IP(IP150) Module version 20, firmware: 1.39

Environment

Linux kvm

• Python version

Git branch

Current version: 3.4.0

Describe the bug

I tried to set automation with notification with user arming/disarming (found that in the wiki) but the user is always None. I have set the User Label from Babyware and nothing changed the log always says: 2023-12-01 19:05:57,619 - INFO - PAI.paradox.interfaces.mqtt.basic - Partition command: Area_1=arm_stay user: None 2023-12-01 19:06:18,205 - INFO - PAI.paradox.interfaces.mqtt.basic - message topic=paradox/control/partitions/Area_1, payload=disarm

To Reproduce

Steps to reproduce the behavior: arm disarm and tail the logs

there are also some warnings for checksum in the logs

Logs

PLEASE DO NOT SEND LOGS IN CLEAR TEXT AS THEY MAY CONTAIN SENSITIVE INFORMATION If you wish to add a log (which will greatly help us), please follow the following instructions:

1. Go to https://keybase.io/encrypt
2. Write to us
   1. Write 'pai_logs.txt' as the recipient if you have SP/MG panel
   2. Write 'yozik04' as the recipient if you have EVO panel
3. Write your log or add a link to the log file (if using services such as dropbox).
4. Click Encrypt
5. Save the result to a text file and add it as an attachment.

[yozik04]

When you arm from PAI, panel does not know what user it was. It uses PC connection to arm/disarm.

[george2asenov]

I have tried this from the keyboard with 2 different user codes.