Problemas na conexão com o servidor, todas as vezes q rodo o código no arduino o servido cai.

[miqueiasamars]

every time q ran the code in arduino my vervidor crashes.

#include <Arduino.h> #include <SPI.h> #include <Ethernet.h> #include <WebSocketsClient.h>

// Enter a MAC address for your controller below. // Newer Ethernet shields have a MAC address printed on a sticker on the shield byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; // Set the static IP address to use if the DHCP fails to assign IPAddress ip(192, 168, 1, 177);

WebSocketsClient webSocket;

void webSocketEvent(WStype_t type, uint8_t * payload, size_t length) {

switch(type) {
    case WStype_DISCONNECTED:
        Serial.println("[WSc] Disconnected!\n");
        delay(1000);
        break;
    case WStype_CONNECTED:
        {
            Serial.print("[WSc] Connected to url: ");
            Serial.println((char *)payload);
            // send message to server when Connected
            webSocket.sendTXT("Connected");
        }
        break;
    case WStype_TEXT:
        Serial.print("[WSc] get text: ");
        Serial.println((char *)payload);
        // send message to server
        // webSocket.sendTXT("message here");
        break;
    case WStype_BIN:
        Serial.print("[WSc] get binary length: ");
        Serial.println(length);
       // hexdump(payload, length);

        // send data to server
        // webSocket.sendBIN(payload, length);
        break;
     }
  }

void setup() { // Open serial communications and wait for port to open: Serial.begin(9600); while (!Serial) {}

// start the Ethernet connection:
if (Ethernet.begin(mac) == 0) {
  Serial.println("Failed to configure Ethernet using DHCP");
  // no point in carrying on, so do nothing forevermore:
  // try to congifure using IP address instead of DHCP:
  Ethernet.begin(mac, ip);
}

webSocket.begin("192.168.1.104", 4001); 
webSocket.onEvent(webSocketEvent);

}

void loop() { webSocket.loop(); }