XMC-for-Arduino
XMC-for-Arduino copied to clipboard
Infineon
Integration of Infineon's XMC microcontrollers into the Arduino IDE.
XMC4 series boards - XMC4200 Platform 2Go - XMC4400 Platform 2Go - XMC4700 Relax Kit (all versions) **Wik**i for XMC4400 and XMC4700 claims on pinout diagram that the AREF pin...
@jaenrig-ifx @boramonideep Whilst tidying up some aspects of GPIO_RESET and similar things like creating a wiki page for XMC Platform 2 Go X1 and X2 connectors. I discovered a few...
2.0.0.-rc2 on mac Error: 13 INTERNAL: Cannot install tool Infineon:[email protected]: testing local archive integrity: testing archive size: fetched archive size differs from size specified in index works for ubuntu, but...
First of you may have an issue or mis-understanding, but in all cases please state the following to assist people to answer your questions quicker. A. Which XMC board are...
CCU40_0_IRQHandler() is defined multiple times. when using the and attachInterrupt(digitalPinToInterrupt(9), alarmMatch, RISING); causes a error message C:\Users\cguen\AppData\Local\Temp\arduino_build_359578/..\arduino_cache_705162\core\core_Infineon_arm_XMC1100_H_BRIDGE2GO_UART_debug,LIB_NONE_1ca69f617a43b0e49b5c85f4dd74c788.a(WInterrupts.c.o): In function `CCU40_0_IRQHandler': C:\Users\cguen\AppData\Local\Arduino15\packages\Infineon\hardware\arm\1.6.0\cores/WInterrupts.c:55: multiple definition of `CCU40_0_IRQHandler' libraries\DeviceControlXMC\utility\timer.c.o:C:\Users\cguen\AppData\Local\Arduino15\packages\Infineon\hardware\arm\1.6.0\libraries\DeviceControlXMC\src\utility/timer.c:66: first defined here I...
**Is your feature request related to a problem? Please describe.** I work on a sensor using prox 30 single hall sensors which are on single Infineon:arm:XMC1100_XMC2GO". For updating the sensor...
I got an error when loading xmc with arduino, can you see what's going on  @PabloPL
By creating this pull request you agree to the terms in CONTRIBUTING.md. https://github.com/Infineon/.github/blob/master/CONTRIBUTING.md --- DO NOT DELETE ANYTHING ABOVE THIS LINE --- CONTRIBUTING.md also tells you what to expect in...
Using XMC2Go 1100 board with JLink already installed; JLink version - v7.92k
Dear Infineon Community, Greetings! **Question/Issue**: I wanted to revisit @techpaul's (Arduino) pinout for the XMC1300 boot-kit. This link [1] is broken. Where can I find it please? References: [1]: https://github.com/techpaul/XMC-for-Arduino/wiki/Hardware-Pins---Pinout-XMC1300-Boot-Kit
