[Bug] Temperature reading bug

[xOrb1t]

trafficstars

I've got some temperature reading bug on my new B550I Aourus PRO AX 1.3 I thought thats because i just swapped mb (and cpu also) but even after fresh install it says something wrong here: https://imgur.com/Ou5Dvnb

Is there any drivers issue? I tried to find solutions but nothing there CPU temps also wrong cuz it reads from acpitz

cat /sys/devices/virtual/thermal/thermal_zone*/type /sys/devices/virtual/thermal/thermal_zone*/temp
acpitz
acpitz
16800
16800

sensors
amdgpu-pci-0600
Adapter: PCI adapter
vddgfx:      718.00 mV 
vddnb:         1.01 V  
edge:         +31.0°C  
PPT:           7.00 W  

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +32.4°C  

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +16.8°C  (crit = +20.8°C)
temp2:        +16.8°C  (crit = +20.8°C)

gigabyte_wmi-virtual-0
Adapter: Virtual device
temp1:        +34.0°C  
temp2:        +35.0°C  
temp3:        +32.0°C  
temp4:        +21.0°C  
temp5:        +34.0°C  
temp6:        +38.0°C  

nvme-pci-0500
Adapter: PCI adapter
Composite:    +44.9°C  (low  = -273.1°C, high = +82.8°C)
                       (crit = +84.8°C)

I use fresh OMV6.5 which is debian smthn

[rainr4]

Did you find a solution? Im currently having a similar issue. My system keeps shutting off :(

[xOrb1t]

Did you find a solution? Im currently having a similar issue. My system keeps shutting off :(

I did not, but your problem is different. This might help you: https://forum.manjaro.org/t/persisting-change-to-sys-class-thermal-thermal-zone-mode/53556

[rainr4]

Ive tried everything but everytime I tried to make it be disabled. First It was permissions issues and then when I got pass the permissions and allowing me write to the file it says “Invalid Argument” . The second part of that doing the “udev” part let me do the commands but nothing changes :(

On Jan 26, 2024, at 5:25 AM, xOrb1t @.***> wrote:

Did you find a solution? Im currently having a similar issue. My system keeps shutting off :(

I did not, but your problem is different. This might help you: https://forum.manjaro.org/t/persisting-change-to-sys-class-thermal-thermal-zone-mode/53556

— Reply to this email directly, view it on GitHub https://github.com/IceWhaleTech/CasaOS/issues/1568#issuecomment-1911922147, or unsubscribe https://github.com/notifications/unsubscribe-auth/BFTOFZITNW5NHSE4DMELFLDYQOHBZAVCNFSM6AAAAABA73EXJSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJRHEZDEMJUG4. You are receiving this because you commented.