Datashield

License

For LLVM see: compiler/llvm/LICENSE.txt

For our code: this code is dual-licensed under the LLVM license (University of Illinois/NCSA Open Source License) and the GPLv3. Choose whatever fits your requirements.

Building the Compiler

0. Setup and environment

We built DataShield in 2016, so baseline your software around that date. You can reproduce our experiments when using

• Ubuntu 16.04 LTS
• clang-3.9, ninja-build, cmake, binutils-dev (of Ubuntu 16.04)
• If you have more than one clang installed, either adapt the makefiles or use update-alternatives clang to set clang to clang-3.9 and clang++ to clang++-3.9

1. Clone this repo

Clone this repo into $HOME/research

There are a lot of build scripts to glue everything together and make the build reproducible. The scripts all assume you cloned in the above directory.

cd ~
mkdir research
cd research
git clone [email protected]:HexHive/datashield.git

2. Build the compiler

The compiler is built using the normal LLVM build process. Consult the LLVM documentation if you have trouble.

You may use my build scripts or change the options if you know what you're doing.

DataShield has 3 different configurations:

1. debug - debug info, unoptimized, with instrumentation
2. baseline - optimized, no instrumentation
3. release - optimized, with instrumentation

If you just want to experiment with DataShield debug might be the best:

cd ~/research/datashield/compiler
mkdir build-debug
cd build-debug
../lto_cmake_debug.sh
ninja install

You can build release if you care about compile times:

cd ~/research/datashield/compiler
mkdir build-release
cd build-release
../lto_cmake_release.sh
ninja install

Baseline is the same as release for the compiler since the compiler itself is not instrumented, but you need to build it if you want a baseline comparison for benchmarking:

cd ~/research/datashield/compiler
mkdir build-baseline
cd build-baseline
../lto_cmake_baseline.sh
ninja install

4. Build libc

To build a configuration, just run build-$configuration

cd $HOME/research/datashield/libc
./build-debug.py
./build-baseline.py
./build-release.py

The scripts create a different install directory for each configuration, so you don't have to rebuild every time you want to test a different configuration. They are:

$HOME/research/datashield/ds_sysroot_debug
$HOME/research/datashield/ds_sysroot_baseline
$HOME/research/datashield/ds_sysroot_release

4. Build libcxx

Building libcxx is basically the same as building libc. It has the same three configurations. Running build.py <config> builds everything. Otherwise run build.py with no arguments for a help message.

cd $HOME/research/datashield/libcxx
./build.py <config>

Compiling Instrumented Programs

You need a lot of options to be able to build with our custom libc, libcxx, and various protections. There are scripts in $HOME/research/datashield/bin that make this much easier. The scripts directory ($HOME/research/datashield/bin) needs to be in your PATH for the scripts to work.

Build Hello World

First, you should build a "Hello World" program to make sure your build is sane.

 cd $HOME/research/datashield/test/hand-written/hello_world
 make
 ./test

It should print out a whole bunch of log information and "hello world" and "good bye." If not, something is seriously wrong and you should create a GitHub issue.

If you look at $HOME/research/datashield/test/hand-written/hello_world/Makefile you will see that there are multiple options for the variable CC. To chose which set of options you want you just change CC to one of the scripts in $HOME/research/datashield/bin. They all start with musl-clang-*.

Build Hello World in C++

Building C++ (versus C) is basically the same but you need to use the C++ scripts. It's a good idea to build "Hello World" in C an C++ as a sanity check.

 cd $HOME/research/tests/hand-written/hello_worldxx
 make
 ./test

Compiler options

You should use the scripts, but if you need/want to change something and know what you're doing you can give options manually. These are the options that the scripts setup:

• -datashield-lto enables the datashield pass (required)
• -T../../linker/linker_script.lds this passes our script to the linker (required)
• -datashield-debug-mode prints debug logs at runtime
• -datashield-save-module-after saves the compiled module to a file after datashield's transformation
• -datashield-save-module-before saves the compiled module to a file before datashield's transformation
• -debug-only=datashield prints debug logs at compile time

The following are mutually exclusive:

• -datashield-use-mask use the software mask coarse bounds check options
• -datashield-use-prefix-check give this option if you want prefix or MPX

The following are mutually exclusive:

• -datashield-use-prefix give this option if you want prefix or MPX
• -datashield-use-late-mpx give this option if you want prefix or MPX

Must be used with -datashield-use-mask

• -datashield-intergity-only-mode only protect stores
• -datashield-confidentiality-only-mode only protect loads
• -datashield-separation-mode basic arithmetic does not propagate sensitivity

Two options for compiling system libraries:

• -datashield-library-mode for compiling libraries with sandboxing only
• -datashield-modular run the pass without LTO