radpro
radpro copied to clipboard
Gissio
Custom firmware for Geiger counters/radiation meters (FS2011, Bosean FS-600, FS-1000, FS-5000, FNIRSI GC-01)
Hi, I'd like to help getting support for this relatively new [Bosean FS-5000](https://www.bosean.net/FS-5000-Nuclear-Radiation-Detector.html?lang=en&class1=2&searchtype&search=search) Geiger counter. Here are some specs: **MCU:** [ARM Cortex-M4 STM32L431RCT6](https://datasheet.lcsc.com/lcsc/1810010516_STMicroelectronics-STM32L431RCT6_C92468.pdf) 80 MHz, 64KB SRAM, 256KB Flash **Extra...
Hello sir, as in the title. The GC-01 with apm32f103rb with latest firmware has a battery life of about 20 hours maximum (screen off!). Also, and it may hint to...
cmd shell was still open:  `c:\temp\ft>flash-fs2011-gd32f150c8.bat Backing up old firmware image... xPack Open On-Chip Debugger 0.12.0+dev-01557-gdd1758272-dirty (2024-04-02-07:27) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html 0 Info...
To get email updates, watch https://github.com/Gissio/radpro! If you wish to report a problem with Rad Pro, post it in [Issues](https://github.com/Gissio/radpro/issues/). If you wish to ask questions, make suggestions, ask for...
Hi, I just tried to export my datalog and had two different exceptions when for some reason some of the log entries came out malformed causing radpro-tool.py to exit with...
I first noticed this in the latest build of 2.0.4. On the splash screen there's a line of corrupted pixels here:  They're not dead pixels on the display, once...
version 2.1 is nice on a gc01 APM32F103RBT6 (Geehy) / CL24CG1045-40B screen and modified to have a j321b tube i installed it the old fashion stlink way after i updated...
Console output: ```sh bosean-fs600 % ./install.sh Available language codes: Enter language code for Rad Pro installation: de ../bosean-fs-600/firmware/radpro-bosean-fs600-de- Firmware image not found. ``` Folder:
Fnirsi GC-01 apm32 While under 2.1.1 export history data works like a charm, it does not with RadPro 3.1.1. radpro-tool.py (win10) imports only 1 record, BTW: Geigerlog 2.1 (win10) imports...
I can not install RadPro on my GMC-800 via the Web Installer. ## Device - GQ GMC-800, stock firmware **Re2.00** ## What happens The installer detects my device correctly ("GQ...
