Everything Smart Home

Good you found a possible cause and that makes sense. I always have auto channel optimisations disabled and prefer manually setting which is why I've perhaps not noticed it. I...

Hello! The EP1 (I assume it's the EP1 you mean, but you mentioned EPL also however that doesn't have humidity so assume EP1) uses the SHTC3 Temp and Humidity sensor...

Yes of course we measured them. We've tested everything about the PCBs extensively. This offset is mentioned in the description off the product and has been ever since it launched...

I'm not sure what you are referring to here, any chance of more information, details, context?

If your having an issue with encryption keys, I recommend removing the config from the ESPHome add-on (since that's where the confusion comes from as it generated the encryption keys)

Can confirm it doesn't work on the ESP32-C6 for some reason, even on the new 10.0.1. You get an error stating it is not supported:

Sorry, my mistake, it does work now! Had a typo in the manifest, fixed with the new ESPHome build action version and now all working and able to flash ESP32-C6...

Try unplugging and plugging back in and then connecting to WiFi again (no need to flash again)

Is this still an issue on newer versions of ESPHome?

The firmware doesn't need an authorisation button so if your seeing that message then I'm guessing you might have installed another blank firmware possibly? The real issue is most likely...