EsserPrototyping

@AnHardt thanks for the info! I don´t know much about using uart with drivers. Are the missing resistors leading to a problem, or are the just not needed (because of...

I added and changed some things.. thanks for the feedback! 

> > I think this should work. > > https://www.digikey.com/product-detail/en/texas-instruments/SN74AHCT595DR/296-26428-2-ND/1567309 > > No, it can`t. I tried this one, nothing output in Dir and Step pin. I still can not...

> Yes sir. Ordered two from the BigTree-Tech.com website this afternoon Thanks AndyRap.. just grabbed one from the store for the limited price, which is not aviable anymore on aliexpress:)

Thanks a lot! If it is physically matching, it should work, because the pins are broken out one to one. flashing another firmware is not a big deal.

The module I wrote about is aviable but not from BTT.. just google "MKS Robin-WIFI module". It is not clear if it is working right out of the box, or...

I measured the pinout of the BTT ESP-12S module.. they are one to one - no pins are flipped. So if you soldered everything the right way, it should be...

In case someone don´t want to google to get the information.. Announcement: https://docs.google.com/document/d/1IeKgfE2WIDjqH1fx5Yg7n1FOHVwhDFmDlZ-7QMlOEV0/edit?fbclid=IwAR2C08blcj-n2OIn2bAAzp0HBsOXjyxAex5Mft9HWQ30yx3eu4dJ4VlRkX8 Check revision: https://docs.google.com/document/d/1swmc4HvP9vxrxV2b9LVGa_I7GLTQGogQns7CfMYCckA/edit Since there seems to be some Rev A boards with "QC Pass 2" Sticker...

Can’t help with the display, but I’ve managed to get rearm and ramps 1.6 plus with tmc2130 running with spi. I have disconnected the CS lines by removing the jumpers,...

Yes, i don´t use a LCD. I´m using this board for a pick and place machine.. but after installing the skr 1.3 in my printer, i think you can have...