dasharo-issues
dasharo-issues copied to clipboard
Dasharo
V540TU: Option `Previous power state restoration` doesn't work
Component
Dasharo firmware
Device
NovaCustom V54 14th Gen
Dasharo version
v0.9.0-rc7
Dasharo Tools Suite version
No response
Brief summary
Previous power state restoration option doesn't boot the platform if it was powered on during power failure
How reproducible
100%
How to reproduce
Go to Power Management Options and set the Power state after power failure option to The state at the moment of failure. Then reset the platform to save the change, get it to boot and simulate a power failure.
Expected behavior
It should power the platform back on.
Actual behavior
It won't power back on when you plug the AC back in, no matter what state the platform was in upon failure.
Similar to the V560TU issue, however this time if you set the option to Powered On, it will be turning on the machine after cutting and restoring power. Only the previous state restoration doesn't boot it up.
Screenshots
No response
Additional context
No response
Solutions you've tried
No response
The state The state at the moment of failure is not implemented yet, only Powered On is actually implemented
The state The state at the moment of failure is not implemented yet, only Powered On is actually implemented
So we need to keep this issue open until it is. I think it is not a critical feature for @wessel-novacustom
The state The state at the moment of failure is not implemented yet, only Powered On is actually implemented
So we need to keep this issue open until it is. I think it is not a critical feature for @wessel-novacustom
I confirm.
