unleashed-firmware
unleashed-firmware copied to clipboard
DarkFlippers
Add *9bit 318MHz* to Applications>Sub-GHz>Sub-GHz Bruteforcer
Describe the enhancement you're suggesting.
I have several remotes (in the USA) with 9-pin dip switches (9bit) to open gates/garages, and they all transmit on 318MHz. I'm not sure if it is Chamberlain, Linear, other, or even if that matters. Could this frequency be added as one of the options under Applications > Sub-GHz > Sub-GHz Bruteforcer?
Thanks.
Anything else?
Also, as a side note, none of the deBruijn applications seem to work. I've tested all of them on gates where I know the frequency and dip-switch settings.
Provide raw recordings of multiple presses of button on your remote, and photos + model / fccid
There are two different remotes: a larger gray one and a smaller whitish one with a black button. If you need anything else please let me know. Thanks. David.
https://user-images.githubusercontent.com/130207130/235338851-1e48e864-8404-44ef-b184-d7d320be67cb.mp4
Videos won't upload.
https://user-images.githubusercontent.com/130207130/235338952-f649563e-ba3d-41ad-a3e4-3b4bcd6be979.mp4
Any progress?
Why you keep asking for something again and again, you still not sent RAW recordings I asked about in my first message You think its possible to do something by looking on photos?
Any progress?
Why you keep asking for something again and again, you still not sent RAW recordings I asked about in my first message You think its possible to do something by looking on photos?
Sorry, I uploaded at least two videos to this thread. I was not sure if anyone had seen this. If the you are unable to see the videos or if the information in the videos is not sufficient, please let me know what to do.
Thank you.
Any progress?
Why you keep asking for something again and again, you still not sent RAW recordings I asked about in my first message You think its possible to do something by looking on photos?
Sorry, I uploaded at least two videos to this thread. I was not sure if anyone had seen this. If the you are unable to see the videos or if the information in the videos is not sufficient, please let me know what to do.
Thank you.
are you joking? on first two videos you doing exactly what i asked for I said:
Provide raw recordings of multiple presses of button on your remote
If you need more info what "raw recording" means you should ask that in first place
Where you sent me that files? There is none as i can see, only video showing how you recording them I asked for files from flipper, open read raw set correct frequency and modulation AM650, press ok, press button on your remote couple times at least 10, 5 short and 5 long holds, then send me resulting file
Provide raw recordings of multiple presses of button on your remote, and photos + model / fccid
I'm sorry. I misunderstood you. I thought when you wrote "raw recordings" you meant video recordings. That is how I understood it. I will send the files of the recordings I record on F0.
F0 Raw Sub Files for Bruteforcer.zip Files are attached. Github won't let me upload .sub files, so I zipped them. The one that ends in AS is for the Allstar remote and the one that ends in MC is for the Multi-Code remote. Let me know if this works for you. Thank you very much.
F0 Raw Sub Files for Bruteforcer.zip Files are attached. Github won't let me upload .sub files, so I zipped them. The one that ends in AS is for the Allstar remote and the one that ends in MC is for the Multi-Code remote. Let me know if this works for you. Thank you very much.
Good, will take a look on them later, also due to lack of flash space adding support of those protocols might be delayed for some time (there is no reason to add them only in bruteforcer app, better will be to add them at subghz lib level)