Pascal

Raspbian is discontinued, it is called Raspberry OS now [here](https://www.raspberrypi.org/software/). Notice that the install script currently does not support the newer OS. I fixed it in a fork, but there...

Oh, the existence of a V2 is new to me 🤦‍♂️ I will look into it. Do you know on top of your head if I did at least something...

Thanks for testing! I will look into that soon. You are using a 32bit board, do you? I never tested it with one, so maybe the manual cap on the...

Hi Kevin, thanks for your first feedback. I will look into that (I believe I initially produced the same condition in the pin safety timeout PR). So basically, it is...

@Arti4ever If you want to try it again, it may be better now. Toolhead code is now called by the reactor. @TazerReloaded What PWM frequency do you use? The Code...

>How fast can/should I go with software PWM? That depends on the computing power of your board. I suggest testing higher freqencies and measuring the jitter with a oscilloscope. >...

@Arti4ever I see that you use a BL-Touch as well. Does it even stow? I had this problem during development as well, but it was solved within the last commits....

Nice hearing that! Unfortunately, getting the heaters to work requires partly a new concept. Currently no free time for that milestone 🐱‍🐉 At least, one can check out the different...

>According to GitHub here are no conflicts so far, so a patch would be possible, but I expect it to be only a matter of a few weeks until conflicts...

Your log points to an error in the message flush system. This relates to the strong coupling between stepper moves and the pin output. > Line 870: Sent 99 5414.972272...