BreadJS

> @OfficialDevvCat a flash programmer will read (and later write - if desired) the built in firmware on the device -- to be clear: it won't do anything with UART....

Okay, I will find online if there a different way to do that. What about the TTL functionality? Does that also output 5v? Or is it just a reading pin?

> @OfficialDevvCat that flash programmer only has TTL functionality - in 3.3V or 5V selected by jumper switch, but this is only for flash chip read/write. The UART pins require...

@guino I just dumped the chip, I did that exactly. Read, verified and disconnected. You can download the dumped bin file from here https://www.mediafire.com/file/31ms1k4kgqxxlh6/Smart_Indoor_IP_Camera.bin/file Let me know what I can...

@guino Just one more question. Do I have to flash the chip afterwards to make it work?? Cause the issue is that the SPI Flasher does not work anymore for...

> @OfficialDevvCat If you tried A0008000 and it didn't work I'll have to try and dig out more from this firmware file. > > Is the camera still working ?...

But again, Do I need to flash stuff again onto the chip? Cause I can't read anywhere what to do after the edit. I assume it has to

I tried to find some variables from the link you sent me but it can't even find the "Loadable segment". Maybe you could take a look at it if you've...

@guino Let me know if I can do anything as I'm a programmer and know my way around some of this stuff! Would be very cool to get this thing...

> @OfficialDevvCat I downloaded a different tool and then I noticed there's an issue with your flash file -- it's only 2Mb when it should be at least 8Mb (some...