MissionPlanner
MissionPlanner copied to clipboard
ArduPilot
Mission Planner Ground Control Station for ArduPilot (c# .net)
when planning a mission it is frustrating that the WP numbers are not displayed on the planning screen. When you have a lot of waypoints (eg. 300 or more) then...
using DO_JUMP is normal in most fixed wing missions, but MissionPlanner doesn't display it correctly here is a MissionPlanner display of a typical quadplane mission:  here is the same...
Long time ago, MissionPlanner was remembering last connected vehicle type - plane for example - and did not always revert to copter for mission planning as in recent versions. This...
 4.4 and 4.5 have many new [camera](https://ardupilot.org/dev/docs/mavlink-camera.html) and [gimbal controls](https://ardupilot.org/dev/docs/mavlink-gimbal-mount.html) available via mavlink but the controls displayed to users are still very clumsy ([user camera controls](https://ardupilot.org/copter/docs/common-camera-controls.html), [user gimbal controls](https://ardupilot.org/copter/docs/common-mount-targeting.html))....
#### Issue details The calculated "Angle" in the flight planing table is wrong some times. This is critical for Fixed wing landing plans. This occurs when I have distance and...
It takes me a long time to read all the config parameters. I can visualize the waiting time by displaying the numbers. I don't see a progress bar indicating how...
Original scripts supports only VS Community. But with vswhere scripts can use any modern VS in any edition
#### Issue details When running Mission Planner on Linux using `mono MissionPlanner.exe`, if the vehicle firmware is not the latest version, Mission Planner crashes as soon as a UDP connection...
working with a user who is finding MissionPlanner in SITL/flightaxis is sometimes not recognizing the quadplane as a plane, so wrong flight modes   but flight modes are correct...
#### Issue details The UI language can be specified in Mission Planner. This allows the user to display in a language different from the system language. I have set the...